Tag Archives: electric ac motor

China Precision Electric AC Gear Motor 3 Stage Single Speed Helical Transmission Reduction Gearbox cycloidal gearbox assembly

Item Description

If you have any concern,remember to speak to us, we will go all out to offer all the clients with substantial top quality and service.

US $8.2-67.5
/ Piece
|
1 Piece

(Min. Order)

###

Shipping Cost:

Estimated freight per unit.



To be negotiated|


Freight Cost Calculator

###

Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Hardness: Hardened Tooth Surface
Installation: Vertical Type

###

Samples:
US$ 8.2/Piece
1 Piece(Min.Order)

|

Order Sample

###

Customization:
US $8.2-67.5
/ Piece
|
1 Piece

(Min. Order)

###

Shipping Cost:

Estimated freight per unit.



To be negotiated|


Freight Cost Calculator

###

Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Hardness: Hardened Tooth Surface
Installation: Vertical Type

###

Samples:
US$ 8.2/Piece
1 Piece(Min.Order)

|

Order Sample

###

Customization:

The Cyclonoidal Gearbox

Basically, the cycloidal gearbox is a gearbox that uses a cycloidal motion to perform its rotational movement. It is a very simple and efficient design that can be used in a variety of applications. A cycloidal gearbox is often used in applications that require the movement of heavy loads. It has several advantages over the planetary gearbox, including its ability to be able to handle higher loads and higher speeds.helical gearbox

Dynamic and inertial effects of a cycloidal gearbox

Several studies have been conducted on the dynamic and inertial effects of a cycloidal gearbox. Some of them focus on operating principles, while others focus on the mathematical model of the gearbox. This paper examines the mathematical model of a cycloidal gearbox, and compares its performance with the real-world measurements. It is important to have a proper mathematical model to design and control a cycloidal gearbox. A cycloidal gearbox is a two-stage gearbox with a cycloid disc and a ring gear that revolves around its own axis.
The mathematical model is made up of more than 1.6 million elements. Each gear pair is represented by a reduced model with 500 eigenmodes. The eigenfrequency for the spur gear is 70 kHz. The modally reduced model is a good fit for the cycloidal gearbox.
The mathematical model is validated using ABAQUS software. A cycloid disc was discretized to produce a very fine model. It requires 400 element points per tooth. It was also verified using static FEA. This model was then used to model the stiction of the gears in all quadrants. This is a new approach to modelling stiction in a cycloidal gearbox. It has been shown to produce results comparable to those of the EMBS model. The results are also matched by the elastic multibody simulation model. This is a good fit for the contact forces and magnitude of the cycloid gear disc. It was also found that the transmission accuracy between the cycloid gear disc and the ring gear is about 98.5%. However, this value is lower than the transmission accuracy of the ring gear pair. The transmission error of the corrected model is about 0.3%. The transmission accuracy is less because of the lower amount of elastic deformation on the tooth flanks.
It is important to note that the most accurate contact forces for each tooth of a cycloid gearbox are not smooth. The contact force on a single tooth starts with a linear rise and then ends with a sharp drop. It is not as smooth as the contact force on a point contact, which is why it has been compared to the contact force on an ellipse contact. However, the contact on an ellipse contact is still relatively small, and the EMBS model is not able to capture this.
The FE model for the cycloid disc is about 1.6 million elements. The most important part of the FE model is the discretization of the cycloid disc. It is very important to do the discretization of the cycloid gear disc very carefully because of the high degree of vibration that it experiences. The cycloid disc has to be discretized finely so that the results are comparable to those of a static FEA. It has to be the most accurate model possible in order to be able to accurately simulate the contact forces between the cycloid disc and the ring gear.helical gearbox

Kinematics of a cycloidal drive

Using an arbitrary coordinate system, we can observe the motion of components in a cycloidal gearbox. We observe that the cycloidal disc rotates around fixed pins in a circle, while the follower shaft rotates around the eccentric cam. In addition, we see that the input shaft is mounted eccentrically to the rolling-element bearing.
We also observe that the cycloidal disc rotates independently around the eccentric bearing, while the follower shaft rotates around an axis of symmetry. We can conclude that the cycloidal disc plays a pivotal role in the kinematics of a cycloidal gearbox.
To calculate the efficiency of the cycloidal reducer, we use a model that is based on the non-linear stiffness of the contacts. In this model, the non-linearity of the contact is governed by the non-linearity of the force and the deformation in the contact. We have shown that the efficiency of the cycloidal reducer increases as the load increases. In addition, the efficiency is dependent on the sliding velocity and the deformations of the normal load. These factors are considered as the key variables to determine the efficiency of the cycloidal drive.
We also consider the efficiency of the cycloidal reducer with the input torque and the input speed. We can calculate the efficiency by dividing the net torque in the ring gear by the output torque. The efficiency can be adjusted to suit different operating conditions. The efficiency of the cycloidal drive is increased as the load increases.
The cycloidal gearbox is a multi-stage gearbox with a small shaft oin and a big shaft. It has 19 teeth and brass washers. The outer discs move in opposition to the middle disc, and are offset by 180 deg. The middle disc is twice as massive as the outer disc. The cycloidal disc has nine lobes that move by one lobe per drive shaft revolution. The number of pins in the disc should be smaller than the number of pins in the surrounding pins.
The input shaft drives an eccentric bearing that is able to transmit the power to the output shaft. In addition, the input shaft applies forces to the cycloidal disk through the intermediate bearing. The cycloidal disk then advances in 360 deg/pivot/roller steps. The output shaft pins then move around in the holes to make the output shaft rotate continuously. The input shaft applies a sinusoidal motion to maintain the constant speed of the base shaft. This sine wave causes small adjustments to the follower shaft. The forces applied to the internal sleeves are a part of the equilibrium mechanism.
In addition, we can observe that the cycloidal drive is capable of transmitting a greater torque than the planetary gear. This is due to the cycloidal gear’s larger axial length and the ring gear’s smaller hole diameter. It is also possible to achieve a positive fit between the fixed ring and the disc, which is achieved by toothing between the fixed ring and the disc. The cycloidal disk is usually designed with a short cycloid to minimize unbalance forces at high speeds.helical gearbox

Comparison with planetary gearboxes

Compared to planetary gearboxes, the cycloidal gearbox has some advantages. These advantages include: low backlash, better overload capacity, a compact design, and the ability to perform in a wide range of applications. The cycloidal gearbox has become popular in the multi-axis robotics market. The gearbox is also increasingly used in first joints and positioners.
A cycloidal gearbox is a gearbox that consists of four basic components: a cycloid disk, an output flange, a ring gear, and a fixed ring. The cycloid disk is driven by an eccentric shaft, which advances in a 360deg/pivot/roller step. The output flange is a fixed pin disc that transmits the power to the output shaft. The ring gear is a fixed ring, and the input shaft is connected to a servomotor.
The cycloidal gearbox is designed to control inertia in highly dynamic situations. These gearboxes are generally used in robotics and positioners, where they are used to position heavy loads. They are also commonly used in a wide range of industrial applications. They have higher torque density and a low backlash, making them ideal for heavy loads.
The output flange is also designed to handle a torque of up to 500 Nm. Its rotational speed is lower than the planet gearbox, but its output torque is much higher. It is designed to be a high-performance gearbox, and it can be used in applications that need high ratios and a high level of torque density. The cycloid gearbox is also less expensive and has less backlash. However, the cycloidal gearbox has disadvantages that should be considered when designing a gearbox. The main problem is vibrations.
Compared to planetary gearboxes, cycloidal gearboxes have a smaller overall size and are less expensive. In addition, the cycloid gearbox has a large reduction ratio in one stage. In general, cycloidal gearboxes have single or two stages, with the third stage being less common. However, the cycloid gearbox is not the only type of gearbox that has this type of configuration. It is also common to find a planetary gearbox with a single stage.
There are several different types of cycloidal gearboxes, and they are often referred to as cycloidal speed reducers. These gearboxes are designed for any industry that uses servos. They are shorter than planetary gearboxes, and they are larger in diameter for the same torque. Some of them are also available with a ratio lower than 30:1.
The cycloid gearbox can be a good choice for applications where there are high rotational speeds and high torque requirements. These gearboxes are also more compact than planetary gearboxes, and are suitable for high-torque applications. In addition, they are more robust and can handle shock loads. They also have low backlash, and a higher level of accuracy and positioning accuracy. They are also used in a wide range of applications, including industrial robotics.
China Precision Electric AC Gear Motor 3 Stage Single Speed Helical Transmission Reduction Gearbox     cycloidal gearbox assemblyChina Precision Electric AC Gear Motor 3 Stage Single Speed Helical Transmission Reduction Gearbox     cycloidal gearbox assembly
editor by czh 2023-01-04

220V price made in China – replacement parts – in Maiduguri Nigeria 550W 2000rpm Electric Induction Small AC Gear Motor Low Temperature Rise, Long Life with top quality

220V  price  made in China - replacement parts -  in Maiduguri Nigeria  550W 2000rpm Electric Induction Small AC Gear Motor Low Temperature Rise, Long Life with top quality

We – EPG Team the largest gearbox & motors , couplings and gears manufacturing unit in China with 5 various branches. For much more details: Cell/whatsapp/telegram/Kakao us at: 0086~13 571 88828 13858117778 571 88828

RRODUCT FATUERS:

The company is a specialised manufacturing facility that makes miniature gear reduction motors on a fastened-position foundation. It has a generation background of far more than ten a long time. The firm has a complete set of enterprise administration and technical administration programs, and its items are created in rigorous accordance with GB / T19001-2000 requirements.

The “Weiqiang” gear reducer created by our firm sells well in provinces, municipalities and autonomous regions of the nation. It is commonly employed in metallurgy, mining, lifting, transportation, petroleum, chemical, textile, pharmaceutical, meals, gentle business, grain, oil, feed and other industries, and is deeply trusted by consumers.
Welcome new and outdated customers to visit and guidebook.

Packaging & Shipping:
1, Waterproof plastic bag packed in foam box and carton as outer packing.
2, Export wooden box packaging for products.

 

The use of authentic gear manufacturer’s (OEM) part quantities or logos , e.g. CASE® and John Deere® are for reference functions only and for indicating product use and compatibility. Our company and the listed substitute components contained herein are not sponsored, authorized, or manufactured by the OEM.

220V  price  made in China - replacement parts -  in Maiduguri Nigeria  550W 2000rpm Electric Induction Small AC Gear Motor Low Temperature Rise, Long Life with top quality

220V  price  made in China - replacement parts -  in Maiduguri Nigeria  550W 2000rpm Electric Induction Small AC Gear Motor Low Temperature Rise, Long Life with top quality

Ye3 Cheap made in China – replacement parts – in Ankara Turkey Ce CCC Ie3 Premium Efficiency Three Phase AC Induction Electric Motor Driven for Fans Pumps Blowers Compressor Conveyors Mixers Ye3-315L-2 185kw 2985rpm with top quality

Ye3  Cheap  made in China - replacement parts -  in Ankara Turkey  Ce CCC Ie3 Premium Efficiency Three Phase AC Induction Electric Motor Driven for Fans Pumps Blowers Compressor Conveyors Mixers Ye3-315L-2 185kw 2985rpm with top high quality

We – EPG Group the biggest gearbox & motors , couplings and gears manufacturing unit in China with 5 diverse branches. For much more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828

YE3 CE CCC IE3 Top quality Effectiveness Three Phase AC Induction Electric powered Motor Driven for enthusiasts pumps blowers compressor conveyors mixers
———————————————————————————————

Overview
Our business has researched and produced total sequence vertical motor for multistage pump, which conforms to the common of IEC Stage 3 (YE3 Sequence) and Energy Performance Stage 2(YXL and YX3 Series). The exterior of the motor manages to get the Design Patent granted by Point out Intellectual House Workplace of the People’s Republic of China. This collection of motor has been efficiently utilised in a lot of domestic multistage pump producing enterprises, as well exported to different locations as European Union, Japan and ZheJiang .

General Description

  • Frame sizes: 71 to 315                
  • Rated output: .37 to 220kW
  • Voltage: 380V or other                 
  • Frequency: 50Hz or 60 Hz
  • Duty Cycle: S1                         
  • Insulation class: F
  • Degree of defense: IP55              
  • Variety of poles: two
  • Effectiveness amounts: IE2 /IE3              
  • Enclosure: IC411

Functions

  • Elegant Visual appeal, minimal sound in begin and operation, meet up with the prerequisite of bi-axial pressure.
  • Set up dimension and Vitality Efficiency conform strictly to the common of IEC and DIN42673, cooling method IC411.
  • Defense Class IP55cast iron frame avert the motor from dust and splash ideal construction in compliance with international regular, risk-free in procedure.
  • Insulation Class F, powerful warmth resistance and shock resistance, long existence span of insulation, be capable to operate in serious environment. 
  • Standardization design, high quality content,superior processing products and best high quality assurance system, important energy conserving,small vibration,minimal noise,continual overall performance and dependable.

Application
Utilized with the multistage pump, the motor’s extensive application ranges in the supply drinking water pressurizing of large creating, h2o shipping in lengthy distance or in the predicament when the force increase by massive force equipment is essential, conference the need of dwelling h2o provide of household regions,big architectural intricate(like college,military,big factory and so on.) and villa-cluster the motor can also be used in the refrigeration method of air-conditioner and fireplace-fighting supercharging of business constructing intricate in pressurizing of waterworks from lengthy distance or be utilized to suction thoroughly clean water from design website.

 

Demonstrate Area


Certificates

Quality Service

Top quality Control

Wannan Motor Creation Workshop and Circulation Chart

Certificates and much more Organization data make sure you go to “ABOUT US”
—————————————————————————————————————————
Welcome to speak to us directly…

be/frVvg3yQqNM

WANNAN MOTOR    INDUSTRIAL Remedies

The use of first equipment manufacturer’s (OEM) element numbers or logos , e.g. CASE® and John Deere® are for reference needs only and for indicating item use and compatibility. Our organization and the listed alternative elements contained herein are not sponsored, approved, or produced by the OEM.

Ye3  Cheap  made in China - replacement parts -  in Ankara Turkey  Ce CCC Ie3 Premium Efficiency Three Phase AC Induction Electric Motor Driven for Fans Pumps Blowers Compressor Conveyors Mixers Ye3-315L-2 185kw 2985rpm with prime top quality

Ye3  Cheap  made in China - replacement parts -  in Ankara Turkey  Ce CCC Ie3 Premium Efficiency Three Phase AC Induction Electric Motor Driven for Fans Pumps Blowers Compressor Conveyors Mixers Ye3-315L-2 185kw 2985rpm with prime top quality

Best China manufacturer & factory Y2 in Abeokuta Nigeria Series Three Phase Induction Ac Electric Motor With high quality best price

Best China manufacturer & factory Y2  in Abeokuta Nigeria  Series Three Phase Induction Ac Electric Motor With high quality best price

our products are selling well in the American, European, South American and Asian markets. a specialized supplier of a full range of chains, sprockets, gears, gear racks, V-belts, couplings and reducers, pto shaft, agricultural gearboxes….

Overview

Quick Details

Place of Origin:Zhejiang, China
Brand Name:

OEM

Model Number:

631-4/0.12KW

Type:

Asynchronous Motor

Frequency:

50HZ

Phase:

three-phase

Certification:

CCC, ce

AC Voltage:

220/380V

Slip clutch: this type uses a slip clutch on the driven end yoke which is comprised of three steel plates in line held together with a series of bolts with springs under the nuts. The idea here is that when you tighten the nuts the pressure is increased onto the centre plate which when set up for the load will allow the shaft to turn and the implement to stall, absorbing the shock load. As mine is rated from 20-40 hp and I’m running a 17 hp I had to make alterations to set it up. Through trial and error I determined that I had to remove half the tension bolts and springs and back off the remainder nuts to minimum in order for the clutch to “slip” prior to stall on the tractor.

Color:

Silverr plastic coating

Product Name:

Y2 Series Ac Motor

We distribute many other items that are not listed above, but are still readily available. Feel free to give us a call or send us an email. We are always ready to help.

Supply Ability

Supply Ability:
15000 Piece/Pieces per Month

Packaging & Delivery

Packaging Details
Each in carton box,then packed in wooden case.
Port
NINGBO/SHANGHAI

Online Customization

The company was certified by ISO9001:2008 Quality Management System.

 

Y2 Series Three Phase Induction Ac Electric Motor

Y2 Series Three Phase Induction Ac Electric MotorY2 Series Three Phase Induction Ac Electric Motor

 

Product Name Y2 Series Three Phase Induction Ac Electric Motor
Color Silverr plastic coating
frequency 50HZ

Y2 Series Three Phase Induction Ac Electric Motor

Y2 Series Three Phase Induction Ac Electric Motor

Y2 Series Three Phase Induction Ac Electric Motor

Y2 Series Three Phase Induction Ac Electric MotorY2 Series Three Phase Induction Ac Electric MotorY2 Series Three Phase Induction Ac Electric MotorY2 Series Three Phase Induction Ac Electric MotorY2 Series Three Phase Induction Ac Electric MotorY2 Series Three Phase Induction Ac Electric Motor

 

1. Can your factory accept OEM or ODM?

   Yes,we have OEM & ODM for more than 22 years.

 

2.Can you offer sample?

    Yes,we can offer Free samples for VIP.

 

3.How about your requirement for MOQ.?

   We have very low requirement on Min. Order Quantity.

 

4.Do your factory offer quality warranty?

   Yes,quality warrantee is guaranteed.

 

5.Do your factory offer trade assurance?

   Certainly,we have trade assurance program support.

 

6.Do your factory accept distribution agent?

   Yes, distribution agent is warmly welcomed.

Y2 Series Three Phase Induction Ac Electric Motor

Best China manufacturer & factory Y2  in Abeokuta Nigeria  Series Three Phase Induction Ac Electric Motor With high quality best price

Best China manufacturer & factory Y2  in Abeokuta Nigeria  Series Three Phase Induction Ac Electric Motor With high quality best price

Best China manufacturer & factory Y2  in Abeokuta Nigeria  Series Three Phase Induction Ac Electric Motor With high quality best price

Best China manufacturer & factory Y2  in Abeokuta Nigeria  Series Three Phase Induction Ac Electric Motor With high quality best price

Best China manufacturer & factory Y2  in Abeokuta Nigeria  Series Three Phase Induction Ac Electric Motor With high quality best price

Best China manufacturer & factory Y2  in Abeokuta Nigeria  Series Three Phase Induction Ac Electric Motor With high quality best price

Best China manufacturer & factory Y2  in Abeokuta Nigeria  Series Three Phase Induction Ac Electric Motor With high quality best price

AC Custom made in China – replacement parts – in Zaporizhzhya Ukraine Wind Cabinet Wind Wheel Spray Pedestal Fan Motor Electric Fan Motor with top quality

AC  Custom  made in China - replacement parts -  in Zaporizhzhya Ukraine  Wind Cabinet Wind Wheel Spray Pedestal Fan Motor Electric Fan Motor with top quality

We – EPG Team the largest gearbox & motors , couplings and gears factory in China with 5 distinct branches. For a lot more particulars: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828

Model CT-88 Two-axis Motor
Undertake automated generation approach, every single component processing is managed by laptop, pc acceptance, meticulous quality

This motor has the characteristics of environmental security, durability, high pace, substantial torque, lower temperature increase and so on. Automated assembly is much more cost-successful than standard manual assembly, It can be debugged into an internal winding motor in accordance to consumer demands. The entirely coated casing is stunning and durable, giving ample defense to the inner electric power. Pure copper enamelled wire generates powerful magnetic poles with no dread of load measurement. Lower noise and substantial good quality oil bearing and ball bearing can hold the motor operating effortlessly and stand the check of time. Two-shaft motor can travel two wind blades or wind turbines at the same time, can be used in 360 °double-sided enthusiasts, air fresheners, pipe exhaust ventilation equipment, air cupboards, water-cooled fans and so on

Deeply liked and adopted by the home appliance ept at residence and overseas, can be debugged and tailored in accordance to the needs, welcome to inquire

Solution check information

110V/60Hz Quickly Quick
(Sizzling)
Middle Middle
(Scorching)
Gradual Slow
(Very hot)
Remarks
  Electric powered current 
 ( mA )
748 740 521 513 455 450 1)Red is scorching information.

2)The temperature rise is 1.06 occasions of the rated voltage and the examination time is 90 minutes.

3)This is double-wheel water-cooled air freshener data.

         Power         
( W )
sixty three 62.eight 54 52.eight forty seven forty five.seven
Rotational speed 
 ( RPM)
1106 1103 1018 1032 887 903
Air quantity
(m/s)
six.5 six.5 5. 5.one four.four four.5
Temperature increase
  (K )
  70   sixty seven   sixty six

BLQ motor to attain automated generation, the use of equipment winding, wire fall, wire binding, soldering, acceptance, all controlled by pc, from production to acceptance, stringent top quality control, meticulous, evident to all

All sorts of High Speed and Higher Precision stamping tools in stamping Workshop,Specialist equipment operators make certain the regular operation of the products and ensure the high quality and steadiness of the merchandise

——————————————————————————————————————————————————————————————————————–

The use of original products manufacturer’s (OEM) element numbers or logos , e.g. CASE® and John Deere® are for reference reasons only and for indicating solution use and compatibility. Our company and the detailed substitution parts contained herein are not sponsored, authorized, or created by the OEM.

AC  Custom  made in China - replacement parts -  in Zaporizhzhya Ukraine  Wind Cabinet Wind Wheel Spray Pedestal Fan Motor Electric Fan Motor with top quality

AC  Custom  made in China - replacement parts -  in Zaporizhzhya Ukraine  Wind Cabinet Wind Wheel Spray Pedestal Fan Motor Electric Fan Motor with top quality

Y2 sales made in China – replacement parts – in Celaya Mexico Series AC 3 Phase Motor AC 3 Phase Three Pase Asynchronous Electric Motors with top quality

Y2  sales  made in China - replacement parts -  in Celaya Mexico  Series AC 3 Section Motor AC 3 Period 3 Pase Asynchronous Electric Motors with top high quality

We – EPG Team the most significant gearbox & motors , couplings and gears factory in China with 5 distinct branches. For far more particulars: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828

Solution Description:

        AC Motor is a gadget that transforms the electrical strength of alternating recent into mechanical strength. The AC Motor is primarily composed of an electromagnet winding or stator winding for producing magnetic area and a rotating armature or rotor. The motor is made by the phenomenon that the electrical coil is compelled to rotate in the magnetic area. AC motors are divided into two varieties: synchronous alternating current motor and induction motor.
      The stator windings of 3-period AC motors are basically a few coils divided by 120 levels, which are linked by triangle or star. When three-stage recent is applied, a magnetic discipline is generated in each coil, and the 3 magnetic fields are mixed to form a rotating magnetic area.
     High voltage ac motors are designed with the application of contemporary engineering resulting in compact equipment showcasing excellent dynamic homes, meeting the most severe application in locations that consist of automation and method handle. 
      Apart from providing reliability and large performance, which will promise lengthy functioning intervals without requiring any servicing, the New higher voltage ac motors current outstanding working functions, which incorporate:

     •Wide speed variation range
     •Dimensions as for each GB and IEC Specifications
     •High effectiveness
     •Low sound amount
     •High moment of inertia
     •High capability to dynamic hundreds
     •Rugged building
    •High vibration resistance
    •Excellent commutation top quality

Solution Parameters:
 

Solution Identify Y2 collection AC 3 section motor Ac 3 stage a few pase asynchronous electric motors
Motor Sort DC Motor,AC Motor,Stepper Motor,Asynchronous Motor ,Synchronous Motor
(Electrical machinery)
Rotational Speed

Low Velocity/Continuous Speed/High Speed/Variable Pace

Stator Section Quantity

3-Stage/One-Section

Regular Features  •NEMA Quality Performance Amount according to NEMA Y
•Three-section, 50, 60 Hz
•Voltage: 3000 to 11000 V 
•Rated output: up to 12500 kw
•Number of poles: 2 ,4,6,8,10 or 12poles
•Frame measurements: 450 mm to 630mm
•Cast aluminium squirrel cage for rotor 
•Degree of defense: IP23 to IP54(Entirely enclosed)
•Class insulation F with class (120ºC) temperature rise
•Grease nipples for body 450 to 630MM
•Continuous Obligation (S1)
•With thermal defense PTC140 ºC or PT100
•Larger diameter shafts for the highest overhung load rankings in the business
•Oversized roller bearings for optimum load ability
•Other optional features underneath ask for
AC Motor AC Motors can function in higher temperature, flammable and other environments, and do not require to cleanse the dirt of carbon brushes regularly, but it is difficult to management the velocity, since it is needed to management the frequency of AC motors (or use induction motors, increase internal resistance, decrease the motor velocity at the exact same AC frequency. Pace, handle the voltage will only affect the torque of the motor. The voltage of the standard civil motor has two sorts, such as 110V and 220V, and there are 380V or 440V in industrial application.
Application AC Motors have higher wor ept efficiency, no smoke, odor, no pollution to the environment, and much less sounds. Because of its collection of positive aspects, it is commonly employed in industrial and agricultural generation, transportation, national defense, industrial and household appliances, health-related appliances and other fields.
For Example:
•Compressor
•Rubber mixer
•Fans and Pumps
•Air brower
•Coal mill and rolling mill
•Crushers
•Conveyor belts
•Centrifugal machines
•Lathe
•Hoist

Item Show

 

The use of unique products manufacturer’s (OEM) part numbers or logos , e.g. CASE® and John Deere® are for reference reasons only and for indicating product use and compatibility. Our firm and the listed alternative components contained herein are not sponsored, accredited, or created by the OEM.

Y2  sales  made in China - replacement parts -  in Celaya Mexico  Series AC 3 Section Motor AC 3 Stage Three Pase Asynchronous Electric Motors with top high quality

Y2  sales  made in China - replacement parts -  in Celaya Mexico  Series AC 3 Phase Motor AC 3 Section Three Pase Asynchronous Electric Motors with leading quality

380V near me shop made in China – replacement parts – in Brasilia Brazil AC Milling Machine Electric Motor for Sale with top quality

380V  near me shop  made in China - replacement parts -  in Brasilia Brazil  AC Milling Machine Electric Motor for Sale with top quality

We – EPG Team the most significant gearbox & motors , couplings and gears manufacturing facility in China with 5 various branches. For more particulars: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828

Creation Description

Y2 Sequence Forged of Iron 3 Period Induction Motor is specifically made for European market place, whose terminal box is situated on
the leading of motor.They are completely enclosed and enthusiast-cooling created. They are recently made in conformity with the related
requirements / rules of IEC&DIN42673 specifications.
 

Type
 
YE2 
Electrical power
 
.seventy five~315kw
Insulation
 
F / B, H/B
Voltage and frequency
 
380/400/415/660/690V  50/60hz
Velocity
 
3000/1500/one thousand/750/600 rpm
Mounitng
 
IMB3/IMV1
Cooling and ventilation
 
TEFC in accordance with IC411 of IEC60034-6.
Winding
 
one hundred% Cooper Wire
Protection class
 
IP54/IP55
Vibration
 
vibration class A, vibration class B is available on request.
Quality assurance
 
ISO9001
Site conditions
 
 from -15°C t0 +40°C and altitude below 1000 meters

Products Application, Value Added Service

PinnxunMotor can provide a complete set of optimal solutions for various Applications,Bring innovation and valueadded to our 
consumers, At the same time, we can also formulate special solutions according to the different needed of customer 

Merchandise  Process
 
Pinnxun often just take very good religion, duty, carefulness and excellence as our management philosophy, committedto offering
consumers with excellent high quality merchandise,every action in processs must be consider full interest.

Qualification certification program

The important for ‘Pinxing’ prolonged-phrases cooperation is to continuously enhance the top quality of is products and service, By virtue of is
comprehensive procedure, good quality management method and strict compliance with global mainstream specifications.’Pinxing’
has recognized a high quality administration technique that has passed ISO9001-2008 Good quality management method certification

ISO14001 Environmental management system.
ISO9001-2008 High quality management program
ISO14001 Environmental management technique
CE European Certification
IECEX Throughout the world Ex Certification for Ex motors
ATEX European Ex Certification for Ex motors
EAC Russia GOST standard Ex certification for Ex motors
CQC China quality center power conservation certification

Around the world Marketing & Services Network 

Worldwide Ideal Marketing and advertising support network is a single of Pinxing’s gain. we have 38 branches in china primary city,5 branches in
the Abroad ,Our organization penetrates much more than 60 nations around the world and areas including South The us, North The usa,Europe, Asia
Center East and Africa, Providing us fast attain capability from income, service, procurement and Transportation since inception, Pinxing
usually uphold the development strategy of industry globalization. we phase and place consumers requirements and ept industry. our
merchandise and support are widely used in global market, and efficiency stable and safety.we customized diverse motors for different
industries

 

The use of original gear manufacturer’s (OEM) component numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating solution use and compatibility. Our business and the detailed alternative areas contained herein are not sponsored, accredited, or created by the OEM.

380V  near me shop  made in China - replacement parts -  in Brasilia Brazil  AC Milling Machine Electric Motor for Sale with top quality

380V  near me shop  made in China - replacement parts -  in Brasilia Brazil  AC Milling Machine Electric Motor for Sale with top quality