Fan Electric motor, 1/8 hp 120V 2.2 Amp 3-Speed
General Description: New fan motor, removed from unused 18” or 24” China Surroundings Compressor diameter TPI fans. Designed to operate an 18” or 24” enthusiast blade (blade NOT included).
This motor has a (detached) cord with grounded plug, motor capacitor and a 3-speed control switch. All the wiring between your electric engine, capacitor and quickness control change is still installed however the cord itself is generally detached as seen in the photos. (Discover “Control Notice” below for change type.)
T (See “Application Notice” below for make use of in various other applications.)
Sizes: The engine body is 5” diameter and 3 ½” long (excluding the shaft). The engine shaft is usually½” (0.500″) diameter x 2 ½” long with a collection screw easy. There are (4) threaded electric fan motor china mounting lugs on leading of the motor, ½” lengthy x .16 dia. with washers and nuts. The studs appear to have got 4mm threads and also to be on a 117mm (4.6”)diameter circle (3 ¼” measured from one stud to another).
Rate: The approximate motor speeds (with a enthusiast blade attached):1660, 1550 and 1370 RPM. Path of rotation (facing the shaft end of the electric motor) is Clockwise.

Control Take note: Motors may come with EITHER a 3-swiftness rotating control KNOB OR a 3-speed PULL-CHAIN SWITCH (we’ve demonstrated BOTH variations in the images). Both of these types of switches both control the engine in the same way (but you possess a rotating knob and you have got a pull-chain). If you order several motor at a time, we can do our best to supply your purchase with each one sort of control or the additional.
Application Note: USUALLY DO NOT use this electric electric motor in a nonfan software. This is a completely enclosed fan electric motor and made to have constant ventilation over the electric motor casing for cooling. The housing isn’t vented and the electrical engine will overheat and get into automatic thermal overload if operate in a nonfan program where there isn’t strong ventilation past the motor. (Caution Note: the electrical motor will restart immediately when it cools back off.) Using this electrical motor for applications apart from 18 & 24″ TPI fans could also overload the engine and cause it to proceed into automatic thermal overload. (Your lover blade from another manufacturer may possess a steeper blade angle.)
Origin: This electric engine is produced in China.