The EP Greenhouse geared motor is a compact and lightweight reduction reducer with an integrated limit switch system that is suitable for assembly of a locally available electric motor. The reducer can be used in manually-managed or climate-managed ventilation and display screen systems in greenhouses. The quick and easy-to-install EP gearbox is definitely rainproof and windproof. The reducer has a high protection course (IP65) and can be utilized within an ambient temperature of 0-60 °C.

The low-noise gear driver for Greenhouse includes a gearwheel transmission and a worm wheel transmission, which are integrated within an aluminum precision housing. The self-braking worm wheel transmission means that the drive shaft is definitely locked when the reduction reducer isn’t running. The fully sealed reduction reducer comes with an expansion chamber with a diaphragm to keep the gear essential oil at a minimal pressure under all conditions, even at high temps. Thanks to the use of an expansion chamber, the gearbox could be installed in any position. There are no limitations, because there is no dependence on a bleed plug. The sealed reduction reducer keeps the apparatus essential oil of the gear motor in optimum condition for its entire operating life time. The gear motor is suitable for discontinuous use, operating class s3-30%, with a maximum activation period of 25 minutes.

The Gear box reduction geared motor has an FT85 motor assembly flange, on to which a suitable IEC standard motor can certainly be installed (EN 50347).

The Gear box includes a rotating limit switch system with operating switches and circuit breakers (NC contacts) for turning off at the end positions. The limit switch system is installed within an integrated chamber and is definitely enclosed by an impact-resistant plastic-type cover. The limit switch system is accessible and simple to adjust. The limit change system’s optimum switching range is 40 or 64 revolutions of the drive shaft. The cabling is linked in spring-clip connections. The gear driver has an IP68 M16 x 1.5 cable gland (5-9 mm cable) for the cable feed-through.

The gear motor for greenhouse includes 16 teeth 5/8”x3/8” sprockets, keys and fasteners. The accompanying chain couplings and assembly plates can be found as accessories.

Maximum drive torque of 150 Nm or 450 Nm.
Rotational speeds of 3 or 5 rpm for a mains frequency of 50 Hz or 3.6 or 6 rpm for a mains frequency of 60 Hz in the event of application of 4-pole electric motor.
Protection class IP65.
May be used in ambient temperatures of 0-60°C.
Ideal for discontinuous use, operating class s3-30%, maximum activation time 25 moments.
Equipped as standard with 16-tooth galvanised chain coupling 5/8″x3/8″.
FT85 motor assembly flange for installing IEC standard motor (EN 50347).
Maximum switching range of limit switch program 40 or 64 revolutions of the drive shaft.
IP68 M16x1.5 cable gland for cable feedthrough (5-9 mm cable).