Single and dual reduction planetary gear drives to be used with electric, hydraulic, air flow motors or mechanical power input from high rate, low torque sources to deliver decreased speeds at increased torques. The input side has regular SAE pads for electric motor mounting. Obtainable in the three output configurations shown below. Many units can be furnished with an integral parking brake.
Solitary reduction drives are limited by 3500 RPM input; dual reduction drives to 5000 RPM. Units with integral parking input speed is limited to 2500 RPM.The same torque comes in either direction of rotation. Torque ratings are intermittent. For continuous operation reduce torque ratings to about 1/3 to 1/2 the values shown. Products provide 95% power transmission efficiency.

Wheel Drive
Input side has standard SAE pads and splined insight. Output aspect has hub for mounting automobile wheel. Free wheel can be done by using the springtime disconnect to disengage the drive shaft. The disengage feature can be regular on all wheel drives.

Shaft Output
Input side regular SAE pads with splined input. Output side choices include: Keyed round, hexed, hollow, tapered or splined shaft.

Spindle Drive
Input side is standard SAE pads with splined insight. Output side has a flanged spindle for coupling to the strain.

Swing Drives
Ever-Power model 6 is offered with or without essential parking brakes. The “SW” Power Wheel offers extra-large tapered roller bearings, a ductile iron hub and temperature treated ring equipment to minimize backlash growth caused by wear. The Plastic Gear Rack external bearing nut supplies the greatest in shaft retention and shaft power. Output can be a spindle shaft or numerous sizes of integral pinion gears.