Single and dual reduction planetary equipment drives to be used with electric, hydraulic, atmosphere motors or hydraulic planetary drive mechanical power input from high quickness, low torque sources to provide reduced speeds at increased torques. The input part has regular SAE pads for engine mounting. Obtainable in the three output configurations shown below. Many units can be furnished with an intrinsic parking brake.
Single reduction drives are limited to 3500 RPM input; double reduction drives to 5000 RPM. Units with essential parking input acceleration is limited to 2500 RPM.The same torque comes in either direction of rotation. Torque ratings are intermittent. For continuous operation reduce torque rankings to about 1/3 to 1/2 the values shown. Models provide 95% power tranny efficiency.

Wheel Drive
Input side has standard SAE pads and splined insight. Output aspect has hub for installation automobile wheel. Free wheel can be done by using the springtime disconnect to disengage the drive shaft. The disengage feature is certainly regular on all wheel drives.

Shaft Output
Input side standard SAE pads with splined input. Output side choices include: Keyed circular, hexed, hollow, tapered or splined shaft.

Spindle Drive
Input side is regular SAE pads with splined insight. Output side includes a flanged spindle for coupling to the strain.

Swing Drives
Ever-Power model 6 emerges with or without integral parking brakes. The “SW” Power Wheel provides extra-large tapered roller bearings, a ductile iron hub and heat treated ring equipment to reduce backlash growth caused by wear. The exterior bearing nut supplies the ultimate in shaft retention and shaft strength. Output could be a spindle shaft or different sizes of essential pinion gears.