We are committed to research and development of goods that meet the increasingly superior electronics industry and so are widely used in computers, kitchen appliances, consumer electronics, communications, facts, industry, medical and other fields.
We also has patent for 360 level AC PIN interchangeable type adaptor and it is leading the world’s exclusive design.
Ever-Power provides items which are more compact, lighter, more vitality efficient, and better to use.
We selling products across the world and receive the certifications for every of country. And in addition acquired ISO9001:2015 and ISO 14001:2015 etc. to ensure products meet the latest regulations.
Gear adapters install between the vehicle transmitting and power take-off, and will serve several purposes. Mostly, adapters are used to change the course of rotation of the PTO output shaft. They may also be utilized to space the PTO out and away from the transmission case. On some imported or non-SAE common transmissions they enable the mounting of regular 6-bolt vitality take-offs. Gear Adapters are available to match most popular transmissions.
Numerous body configurations: Can relocate the PTO output shaft 
to boost clearance for a driveshaft or direct-coupled pump
Improvements PTO shaft rotation: Suits PTO rotation to that of the driven equipment
Standard and nonstandard bolt patterns: Fits SAE standard PTOs to non-standard transmissions
• Frame constructed of 1/4″, 3′ x 3″ and 1/4″, 2″ x 2″ steel tubing
• Operates from skid steer hydraulics
• Requires a the least 16 GPM; maximum of 22 GPM (produces 20 to 40 HP from the power take off)
• You don’t need to modify electrical power take off shafts
• Adjustable lower arms
• Reinforced durable universal mounting brackets
• Complete with motor, hydraulic hoses and flat faced couplers
• Ideal for three point power take off apparatus – snow blowers, mowers, tillers, post hole augers, etc
: Over-running clutches give a safe means to protect operators and expensive machinery from scenarios when the inertia of PTO motivated apply exceeds and over-operates the tractor PTO speed. When this happens, the over-operating coupler will free-wheel
smoothly and properly. Over-running clutches will normally tolerate applications needing up to 65 h.p. at 540 rpm and 100 h.p. at
1000 rpm. Intense shock loads or drive line angularity will reduce this capability
If the space of your PTO does not fit flawlessly within a tractor, a PTO adapter can extend the size without having to replace it for a fresh one. This adapter comes with an overall amount of 7-3/16″ with a male end 1-3/8″ x 6 spline and a lady 1-3/8″ x 6 spline end.
Create additional duration on the finish of your PTO. This tractor PTO shaft adapter has both a female 6 spline end and a male 6 spline end, each end includes a diameter of 1-3/8 in. This enables more connection options and is perfect for anyone that owns an older tractor because the older parts may not be produced any longer and so are less common.
The over-running coupler is an essential part of PTO drive on rotary mowers, bailers, hay conditioners or any implement where inertia of driven unit could be required to over-run traveling source. The coupler drives Pto Adapter china solidly from tractor to put into action and free wheels easily when put into action exceeds tractor PTO speeds. All measurements are nominal.
Converts a 1 1/8″ keyed spline to a 1 3/8″ 6 spline.
Necessary with 1000 RPM gearcase upgrade or Three Point Hitch package for the 25PTOC.
This Small 1000 (21 Spline) to 540 PTO Adapter may be the perfect match for your Shop Dog. It could be easily carried in the Store Dog’s hitchpin and PTO adapter carriers.
This is also a good PTO adapter for tractor use. This adapter decreases the tractor’s PTO from 1-3/8″ x 21 spline to 1-3/8 6 spline (540) and extends the PTO shaft 4-1/8″. It comes with an overall length of 6-3/8″ and is rated for tractors up to 70 HP.