Hanging Pulleys for Rope-For Horizontal Pulling
Hang these pulleys from hooks, screws, and bolts to assist with horizontal pulling or to guide a rope.
Pulleys with two grooves are for use where multiple pulleys move an individual load, such as for example block and tackle systems. They require about half the pressure of a single-groove pulley to go the same load.
Pulleys with a bearing are simpler to turn than pulleys without a bearing.
Acetal, nylon, and light weight aluminum are light-weight and corrosion resistant. Stainless steel is the most corrosion resistant.
Styles C, D, and J have got a bracket on underneath for tying off a single end of a rope.
Style K decrease the force needed to keep your load set up. Unlike regular pulleys, these possess a V-groove for more grip on your rope, plus they ratchet when under load therefore they don’t slip in the various other direction. Pulley for3/8″ dia. rope could be arranged to ratchet even when not under load.
Mounted Pulleys for Rope-For Horizontal Pulling
Install these pulleys to a flat surface to assist with horizontal pulling or even to guide a rope.
Pulleys with a bearing are simpler to turn than pulleys with out a bearing.
Light weight aluminum and nylon are light-weight and corrosion resistant. Stainless steel gets the most corrosion resistance.
Pulleys for Rope-For Horizontal Pulling
Also referred to as sheaves, use these pulleys to aid with horizontal pulling or even to guide a rope.
Pulleys with a bearing are easier to change than pulleys with out a bearing.
Acetal and aluminum are lightweight and corrosion resistant. Galvanized steel is definitely more corrosion resistant than iron and metal. Stainless steel is the most corrosion resistant.
Easy-Open up Hanging Pulleys for Rope-For Horizontal Pulling
Also referred to as snatch blocks, these pulleys open so it is easier to feed the rope through the housing-a totally free rope end is not needed. Use them to assist with horizontal pulling or to guide a rope.
Pulleys with a bearing are easier to change than pulleys with out a bearing.
Aluminum is more light-weight than stainless steel. Stainless is usually more corrosion resistant than aluminium.
Pulleys for Wire Rope-For Horizontal Pulling
Also called sheaves, use these pulleys to assist with horizontal pulling or even to guide a rope.
Pulleys with a bearing are easier to switch than pulleys without a bearing.
Acetal and nylon are lightweight and corrosion resistant. Stainless may be the most corrosion resistant.
Mounted Pulleys for Wire Rope-For Horizontal Pulling
Attach these pulleys to a flat surface to assist with horizontal pulling or to guide a rope.
Pulleys with two grooves are for use where multiple pulleys move a single load, such as for example block and deal with systems. They require about 50 % the push of a single-groove pulley to go the same load.
Pulleys with a bearing are simpler to turn than pulleys without a bearing.
Stainless steel is more corrosion resistant than steel.
Hanging Pulleys designed for Wire Rope-For Horizontal Pulling
Hang these pulleys from hooks, screws, and bolts to assist with horizontal pulling or to guide a rope.
Pulleys with two grooves are for make use of where multiple pulleys move a single load, such as block and tackle systems. They require about half the pressure of a single-groove pulley to move the same load. They have a bracket on underneath for tying off one end of your wire rope.
Pulleys with a bearing are easier to turn than pulleys with out a bearing.
Nylon is much lighter than metal. Aluminum is corrosion resistant. Stainless may be the most corrosion resistant.
Pulley with carabiner can mount to metal framing or hang as part of your rigging system.
Easy-Open up Hanging Pulleys for Wire Rope-For Horizontal Pulling
Also referred to as snatch blocks, these pulleys open so it’s easier to feed the rope through the housing-a free rope end is not needed. Use them to assist with horizontal pulling or to guide a rope.
Style D pulleys possess a corrosion-resistant stainless steel housing.
Pulleys for Wire Rope-For Lifting
Utilize the bore to install these pulleys on a shaft. These pulleys are also called sheaves.
Pulleys with a bearing are simpler to convert than pulleys without a bearing.
Nylon pulleys are much lighter than steel pulleys.
Warning: Never make use of to lift people or products over people.
Mounted Pulleys for Wire Rope-For Lifting
Mount these pulleys to a set surface.
Pulleys with two grooves are for make use of in applications where multiple pulleys move an individual load, such as block and deal with systems.They are able to reduce the force had a need to move the strain by up to two times compared to single-groove pulleys.
Pulleys with a bearing are easier to change than pulleys without a bearing.
Stainless steel pulleys are more corrosion resistant that steel.
Style 3 pivots up to 200° for different pull directions.
Warning: Never use to lift people or items over people.
Hanging Pulleys meant for Wire Rope-For Lifting
Hang these pulleys from hooks, screws, and bolts.
Pulleys with two grooves are for use where multiple pulleys move a single load, such as block and tackle systems. They require about half the pressure of a single-groove pulley to go the same load.
Pulleys with a bearing are easier to convert than pulleys with out a bearing.
Style E pulleys have bracket on the bottom that enables you to tie off one end of your wire rope.
Warning: Never use to lift people or products over people.
Easy-Open up Hanging Pulleys for Wire Rope-For Lifting
Also known as snatch blocks, these pulleys open so it’seasier to feed the rope through the housing-a free rope end isn’t needed.
Pulleys with two grooves are for use where multiple pulleys move an individual load, such as for example block and tackle systems. They require about half the push of a single-groove pulley to move the same load.
Latch kits (sold separately) add a latch to the swiveling hook on Design C to keep rope secure.
Warning: Never use to lift people or items over people
Hanging Pulleys meant for Rope-For Lifting
Hang these pulleys from hooks, screws, and bolts.
Pulleys with two grooves are found in applications where multiple pulleys move a single load, such as block and deal with systems. They are able to reduce the force had a need to move the strain by up to two times in comparison to single-groove pulleys.
Pulleys with a bearing are simpler to switch than pulleys with out a bearing.
Style A pulleys have a bracket on the bottom for tying off a single end of a rope.
Warning: Never make use of to lift people or products over people.
Easy-Open up Hanging Pulleys for Rope-For Lifting
Also referred to as snatch blocks, these pulleys open so it’s simpler to feed the rope through the housing-a totally free rope end isn’t needed.
Warning: Never make use of to lift people or products over people.