Small Precison Worm Reduction Gearboxes
There are numerous of specifications you will have to consider when coming up with a worm gearbox selection.
First, what is the insight and output torque requirements? Next, check vendor horsepower/torque charts and pick the correct worm equipment reducer.
If how big is the gearbox is going to be an important consideration after that check the reducer dimension specifications, not all producers make compact units. In fact, working with the right supplier will help you not only find the right equipment reducer but also prevent some of the most typical errors in reducer selection. We offer a free guide to assist you find the appropriate supplier to work with.
For low and fractional horsepower app we offer two sizes of worm equipment reducer, the SW-1 and the SW-5. Size and torque output will be the major distinctions between both of these models. Both feature either a hollow or solid result shaft. Both versions are compact and offer users an array of ratios, including:
SW-1, 3.5:1 to 60:1
SW-5, 5:1 to 100:1
Understanding the specs of your unique application or project is essential to selecting the correct worm gearbox.
Precision, 6:1 to 100:1 ratios, torque 1 to 10 Nm and multishaft arrangements
M1, M2, M3
Metric Worm Reduction Gearboxes
Little precision with multi-shaft arrangements
• 6:1 to 100:1
• Torque 1 to 10 Nm
• Drilled and tapped installation holes at the top and bottom
• Flush fitting bearing caps simple to install
• Input shafts installed on precision ball bearings
• Max. input speed 10000rpm
• Anti backlash version available
Additional Range:
Neckar Worm Gearboxes Type S – 4 sizes available
Smallest gearbox specifications:
• 5:1 to 60:1
• Output Torque: 1.4-2 Nm
• Aluminium housig
• Special steel worm wheel
• Max. load capacity of output shaft 100N radial, 50N Axial
• Max. input speed 5,000 rpm
• Weight: 0.225kg
Where are Correct Angle Worm Gear Motors Used
Anywhere a concise dual shaft gear motor or single shaft gear motor is required. This right angle equipment motor is indeed versatile it could work just about anyplace.
Features & Options
Double Shaft or One Shaft
Hollow Shaft
Maximize Torque in a little Package
Wide Gear Ratio
Cost-Effective
Compact Size
Specifications
Rated Torque: 55.3 – 700 g-cm
Rated Speed: 4710-5900 rpm
Rated Current: 240 – 5500 mA
Gear Ratios: 1:50 – 1:1050
Using miniature gears, Ever-Power has designed and built exclusive, high precision mini gearboxes that cannot be found somewhere else. Our miniature gearboxes can be found in many configurations, which includes worm and wheel, cross axis helical, bevel, inline spur, and more. We are able to also provide customized micro gearboxes that are designed and created to meet your specific specifications.
E mail us for the mini gearbox the application requires, or request a quote on a custom micro gearbox.
Micro Gearbox Options
Gearboxes are also called reducers, gear reducers, rate reducers, equipment drives, and gearmotors. All terms can be used pretty much interchangeably. Please note that the links for our little gear drives include details on the full small worm gearbox selection of body sizes for that series or design.
Bevel Box Micro Gear Drive
Our bevel box miniature gear drives are software rated for the ideal balance of overall performance and cost. Torque could be balanced to meet up your RPM and operating life requirements. Lightweight with low backlash overall performance (less than 1°, with choice of 1/2”).
Output torque: up to 7 oz.-inches
Low backlash: ≈1°, option of 1/2”
Rated for input speeds up to 2,000 RPM
Temperature range: -5° to 175°F (-20° to 79°C); optional to -40°F (-40°C)
Cross Axis Helical Miniature Gearbox
Ever-Power miniature cross axis helical gearboxes provide relatively high amounts of thrust in a compact package. They offer an result shaft at 90° from the input, and are available in gear ratios from 1:1 to 40:1. Lightweight but durable, with machined aluminum housings and hardened alloy metal gears.
High efficiency: up to 88% at 1,000 RPM
Low backlash: as low as ≤30 arc minutes
Rated for input boosts to 4,000 RPM
“Left hand” models available
Miniature 2 Shaft Worm Gearbox
Our miniature 2 shaft worm gearmotors are engineered for ≤30 arc mins of backlash or better. Also known as “shaft to bore gearboxes,” these devices provide a single insight shaft that protrudes from reverse sides of the casing; output is certainly a keyed bore. Standard single- and double-end shafts can be found and supplied with keys and retainer bands. An array of equipment ratios and input sizes are available to meet your preferences.
High efficiency: up to 86% at 1,000 RPM
Low backlash: ≤30 arc minutes or better
Available in ratios from 5:1 to 120:1
Rated for input speeds up to 3,000 RPM
Miniature 4 Shaft Worm Gearbox
Every miniature 4-shaft worm gearbox from Ever-Power features precision-machined hardened metal gears, solid aluminium housings, and permanent lubrication. They provide two input shafts on opposite sides of the body, with two result shafts perpendicular to the input shafts. Our mini 4 shaft worm equipment drives deliver high performance performance with low backlash.
High efficiency: up to 82% at 1,000 RPM
Low backlash: less than ≈2°
Available with gear ratios from 1:1 to 32:1
Rated for input boosts to 4,000 RPM
Miniature Flange Worm Equipment Drive
These micro flange worm gearboxes produce an output at 90° from the input. They deliver superior performance in an amazing array applications and are built with small footprints, making them perfect for operations where space is bound. They offer high effectiveness with low backlash.
Gear ratios from 6.66:1 to 80:1
High efficiency: up to 83% at 1,000 RPM
Low backlash: only ≤4°
Max. input speed: 3,000 PRM
DC motor option available
Miniature Inline Spur Gearbox
Specifically engineered for encoder applications, Ever-Power’ micro inline spur gear drives can be found in two frame sizes, and are rated for boosts to 3,000 RPM. Aluminium housings and stainless gears and shafts make these inline spur gearboxes challenging and corrosion resistant, for your many demanding applications.
Output torque: up to 125 oz.-inches
Low backlash: less than 15 arc minutes
Available with gear ratios from 4.96:1 to 3600:1
Optional synchro cleats available
Compact Wormwheel Gearbox
These miniature right angle worm equipment reducers deliver excellent performance with high efficiency, and show rugged construction for challenging power transfer operations. Available in three gear ratios (5:1, 10:1, 20:1), our compact worm gearboxes are built in extremely compact footprints for applications where space is bound.
90° output angle
Gear ratios: 5:1, 10:1, and 20:1
Up to 12.5 inch-lbs. of output torque
Max. input speed: 3,000 RPM
Compact footprint: 1.5” x 1.5” x 1.08”
Custom Miniature Gearbox
Ever-Power may engineer and produce a customized miniature gearbox to meet your unique specifications. We can produce custom micro gearboxes in any configuration the application requires, with result torque amounts as high as 900Nm. We are able to work from your gearbox designs, reverse engineer a preexisting unit, or help you develop an all-new design that provides the performance you will need. Request a quote on a customized miniature gearbox or contact us to discuss your specific requirements.
The Ever-Power Advantage: Small is No Big Problem
Broadest collection of small gear reducers
Greased for life
Ruggedly built
Modifications and particular ratios available
Custom small gearboxes made to suit
Input & Output Shafts
Input and result shafts with drive important and retainer rings can be supplied to your specifications for just about any of our hollow bore miniature gearboxes. We offer a basic selection of solitary ended or double ended shafts to put together in these gearboxes. All gearbox shafts are given keys and retainer bands.
For P and PF series worm and wheel gearboxes use our P/PF gearbox shafts.
For Electronic series crossed axis helical gearboxes use our Electronic gearbox shafts.
For F series spur gearboxes, contact our program engineers to go over your particular needs.
We offer a broad selection of misalignment shaft couplings in ” and metric bore sizes. In . and metric precision surface shafts are available from stock.
Contact Us for High Performance Miniature Gearboxes
We will be the miniature gearbox professionals. All of our micro gear drive versions deliver superior functionality in a small footprint, and are tough enough for challenging work environments. E mail us to find out more about our mini gearboxes, or ask for a quote on a custom made model that is tailored to your needs.
Additional benefits of worm drive gearboxes include: