Product Description
Product Description
ATA Series Shaft mounted Gearbox Reducer SMR Series Shaft mounted Gearbox Reducer
ATA series shaft mounted gearbox(speed reducer) with helical hardened gears has the characteristics of high carrying capacity, smooth transmission, light weight, low energy consumption and so on. Input shaft of ATA speed reducer is connected with gear motor by belt pulley, hollow output shaft is linked with a key. It can be replaced by electric drum as power for belt conveyors and lifting equipments. ATA series shaft mounted gearbox could be attached with back-stop to avoid the working machine back skating, and conveniently mounted by tie rod. ATA series shaft mounted speed reducer is widely applied in the mining equipments, concrete mixing batching plant, stone crushers, sand making production line and other belt conveyors, mechanical transmission areas.
Mechanical belt conveyors drive system is composed of ATA shaft mounted speed reducer, torque arm, pulleys and gear motors, whose power transmission from the gear motor to the gearbox through the pulley, and then speed reducer passed to the drive pulley through the hollow output shaft and the gearbox is fixed by torque arm, anti-slip device can be configured. The system is convenient to install,use and maintain.
Features
Mounting Type: Tie rod Hanging shaft mounted
Output Shaft: Single key hollow shaft, each model can select 3 hollow diameter at most.
Gearbox Housing: Hard Iron Steel, can be used outside.
Anti-slip device: Can suit for any model, It’s very convenient to be mounted.
Application
Stone crushers plant , Cement plant, Concrete batch mixing plant, Mining conveyors, Port transfer
conveyor, Crushing machine, etc ···
Characteristic
1) All gears are heat treated and fixed to achieve low noise and high output
2) Mounting dimensions are interchangeable with Fenner
Product Parameters
| TA Shaft Mounted Reducer | Output Shaft Bore [mm] | Ratio(i) | Rated torque | |
| TA30 | Φ30 | 7, 10, 12.5 | 180N.m | |
| TA35 | Φ35 | 5,10,15,20,25 | 420N.m | |
| TA40 | Φ40 | 5,10,12.5,15,20,25 | 900N.m | |
| Φ45 | ||||
| TA45 | Φ45 | 5,10,12.5,15,20,25 | 1400N.m | |
| Φ50 | ||||
| Φ55 | ||||
| TA50 | Φ50 | 5,10,12.5,15,20,25 | 2300N.m | |
| Φ55 | ||||
| Φ60 | ||||
| TA60 | Φ60 | 5,10,12.5,15,20,25 | 3600N.m | |
| Φ70 | ||||
| TA70 | Φ70 | 5,10,12.5,15,20,25,31 | 5100N.m | |
| Φ85 | ||||
| TA80 | Φ80 | 5,10,12.5,15,20,25,31 | 7000N.m | |
| Φ100 | ||||
| TA100 | Φ100 | 5,10,12.5,15,20,25,31 | 11000N.m | |
| SMR Model No. |
Output Shaft Bore [mm] |
Ratio(i) | ||
| Standard | Alternative | 5:1 13:1 20:1 |
||
| B | Φ30 | Φ40 | ||
| C | Φ40 | Φ50 | ||
| D | Φ50 | Φ55 | ||
| E | Φ55 | Φ65 | ||
| F | Φ65 | Φ75 | ||
| G | Φ75 | Φ85 | ||
| H | Φ85 | Φ100 | ||
| J | Φ100 | Φ120 | ||
Production Process
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Motor, Machinery, Agricultural Machinery, Industry |
|---|---|
| Function: | Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction |
| Layout: | Cycloidal |
| Customization: |
Available
| Customized Request |
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Efficiency of Cycloidal Gearboxes in Power Transmission
Cycloidal gearboxes offer relatively high power transmission efficiency compared to other types of gearboxes. The efficiency of a cycloidal gearbox depends on various factors, including the design, quality of components, lubrication, and load conditions.
Typically, the power transmission efficiency of a cycloidal gearbox ranges from 85% to 95%. However, this can vary based on several factors:
- Number of Reduction Stages: Multi-stage cycloidal gearboxes may experience slightly lower efficiency due to multiple gear meshing interactions.
- Quality and Design: Well-designed and precision-manufactured cycloidal gearboxes tend to exhibit higher efficiency.
- Lubrication: Proper lubrication is crucial for reducing friction and enhancing efficiency. Insufficient or deteriorated lubrication can lead to efficiency losses.
- Load Conditions: Higher loads and torque levels can lead to higher friction and lower efficiency. Properly matching the gearbox to the application is essential.
Despite minor efficiency losses compared to some other gearbox types, the benefits of compactness, high torque density, and precise motion control often outweigh the efficiency considerations in many applications.
Safety Measures for Operating Cycloidal Gear Systems
Operating cycloidal gear systems requires careful attention to safety to prevent accidents and ensure the well-being of operators and personnel. Here are important safety measures to consider:
- Training: Provide proper training to operators and maintenance personnel on the operation, maintenance, and potential hazards associated with cycloidal gear systems.
- Protective Equipment: Operators should wear appropriate personal protective equipment (PPE) such as gloves, safety glasses, and protective clothing.
- Lockout-Tagout: Implement lockout-tagout procedures to ensure that the system is de-energized and isolated before any maintenance or repair work begins.
- Regular Inspections: Conduct routine inspections of the gear system to identify any signs of wear, damage, or abnormalities that could compromise safety or performance.
- Lubrication: Follow the manufacturer’s recommendations for lubrication to maintain optimal performance and prevent overheating.
- Temperature Monitoring: Install temperature sensors or monitoring devices to detect any excessive heat buildup in the gearbox, which could indicate a potential issue.
- Proper Ventilation: Ensure that the area where the gear system operates is well-ventilated to prevent the accumulation of heat or harmful fumes.
- Emergency Stop: Install emergency stop buttons or switches that can immediately shut down the system in case of an emergency.
- Clearance Zones: Establish clear clearance zones around the gear system to prevent accidental contact with moving parts.
- Regular Maintenance: Follow a scheduled maintenance routine to keep the gear system in optimal working condition and address any potential safety concerns.
- Operator Awareness: Ensure that operators are aware of the gear system’s potential hazards and safe operating practices.
- Warning Signage: Clearly mark areas where the gear system operates with appropriate warning signs and labels.
- Emergency Procedures: Develop and communicate clear emergency procedures to respond to accidents, malfunctions, or other unexpected events.
Prioritizing safety in the operation and maintenance of cycloidal gear systems is essential to prevent injuries and maintain a safe working environment.
What is a Cycloidal Gearbox?
A cycloidal gearbox, also known as a cycloidal drive, is a type of gearing mechanism that utilizes the principle of cycloidal motion for power transmission. It consists of several components, including a high-speed input shaft, a set of cycloidal pins or rollers, and an outer stationary ring with lobed profiles.
The operation of a cycloidal gearbox involves a unique mechanism:
- Input Shaft: The high-speed input shaft is connected to the driving source, such as an electric motor. It transfers rotational motion to the cycloidal pins.
- Cycloidal Pins or Rollers: These pins or rollers are typically arranged around the input shaft in a circular pattern. As the input shaft rotates, the cycloidal pins also rotate, causing them to engage with the lobes on the outer stationary ring.
- Outer Stationary Ring: The outer ring has lobed profiles, and it remains stationary during operation. The lobes of the outer ring interact with the cycloidal pins or rollers, causing them to move in a unique motion known as epicycloidal or hypocycloidal motion.
The interaction between the cycloidal pins and the lobed profiles of the outer ring results in smooth and controlled motion transmission. The mechanism provides advantages such as high torque capacity, compact size, and precise positioning capabilities.
Cycloidal gearboxes are widely used in various applications, including robotics, automation, packaging machinery, and other industrial systems where high torque, precision, and compact design are essential.
editor by CX 2024-03-27
China Hot selling R Series Inline Horizontal Helical Gear Speed Reducer for Belt Conveyor cycloidal drive gearbox
Product Description
Detailed Photos
Product Description
Product Features
High modular design.
Integrated casting housing,compact dimension,high loading support, stable transmitting and low noise level.
Perfect oil leakage preventing makes the good sealings and can be used in wide range of industry.
This series is special for pug mill.
High efficiency and save power.
Save cost and low maintenance.
Product Parameters
Technical data:
|
Housing material |
Cast iron/Ductile iron |
|
Housing hardness |
HBS190-240 |
|
Gear material |
20CrMnTi alloy steel |
|
Surface hardness of gears |
HRC58°~62 ° |
|
Gear core hardness |
HRC33~40 |
|
Input / Output shaft material |
42CrMo alloy steel |
|
Input / Output shaft hardness |
HRC25~30 |
|
Machining precision of gears |
accurate grinding, 6~5 Grade |
|
Lubricating oil |
GB L-CKC220-460, Shell Omala220-460 |
|
Heat treatment |
tempering, cementiting, quenching, etc. |
|
Efficiency |
94%~96% (depends on the transmission stage) |
|
Noise (MAX) |
60~68dB |
|
Temp. rise (MAX) |
40°C |
|
Temp. rise (Oil)(MAX) |
50°C |
|
Vibration |
≤20µm |
|
Backlash |
≤20Arcmin |
|
Brand of bearings |
China top brand bearing, HRB/LYC/ZWZ/C&U. Or other brands requested, SKF, FAG, INA, NSK. |
|
Brand of oil seal |
NAK — ZheJiang or other brands requested |
Our Advantages
Packaging & Shipping
Certifications
Company Profile
Xihu (West Lake) Dis.ng Transmission Equipment Co., Ltd. located HangZhou city, ZHangZhoug, as 1 professional
manufacturer and exporter of cycloidal pin wheel reducer,worm reducer, gear reducer, gearbox ,
AC motor and relative spare parts, owns rich experience in this line for many years.
We are 1 direct factory, with advanced production equipment, the strong development team and
producing capacity to offer quality products for customers.
Our products widely served to various industries of Metallurgy, Chemicals, lifting,mining,Petroleum,textile,medicine,wooden etc. Main markets: China, Africa,Australia,Vietnam,
Turkey,Japan, Korea, Philippines…
Welcome to ask us any questions, good offer always for you for long term business.
FAQ
Q: Are you trading company or manufacturer?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock.
Q: Can we buy 1 pc of each item for quality testing?
A: Yes, we are glad to accept trial order for quality testing.
Q:How to choose a gearbox which meets your requirement?
A:You can refer to our catalogue to choose the gearbox or we can help to choose when you provide
the technical information of required output torque, output speed and motor parameter etc.
Q: What information shall we give before placing a purchase order?
A:a) Type of the gearbox, ratio, input and output type, input flange, mounting position, and motor informationetc.
b) Housing color.
c) Purchase quantity.
d) Other special requirements.
| Application: | Motor, Machinery, Marine, Agricultural Machinery |
|---|---|
| Hardness: | Hardened Tooth Surface |
| Installation: | Vertical Type |
| Layout: | Coaxial |
| Gear Shape: | Helical |
| Step: | Single-Step |
The Cyclonoidal Gearbox
Basically, the cycloidal gearbox is a gearbox that uses a cycloidal motion to perform its rotational movement. It is a very simple and efficient design that can be used in a variety of applications. A cycloidal gearbox is often used in applications that require the movement of heavy loads. It has several advantages over the planetary gearbox, including its ability to be able to handle higher loads and higher speeds.
Dynamic and inertial effects of a cycloidal gearbox
Several studies have been conducted on the dynamic and inertial effects of a cycloidal gearbox. Some of them focus on operating principles, while others focus on the mathematical model of the gearbox. This paper examines the mathematical model of a cycloidal gearbox, and compares its performance with the real-world measurements. It is important to have a proper mathematical model to design and control a cycloidal gearbox. A cycloidal gearbox is a two-stage gearbox with a cycloid disc and a ring gear that revolves around its own axis.
The mathematical model is made up of more than 1.6 million elements. Each gear pair is represented by a reduced model with 500 eigenmodes. The eigenfrequency for the spur gear is 70 kHz. The modally reduced model is a good fit for the cycloidal gearbox.
The mathematical model is validated using ABAQUS software. A cycloid disc was discretized to produce a very fine model. It requires 400 element points per tooth. It was also verified using static FEA. This model was then used to model the stiction of the gears in all quadrants. This is a new approach to modelling stiction in a cycloidal gearbox. It has been shown to produce results comparable to those of the EMBS model. The results are also matched by the elastic multibody simulation model. This is a good fit for the contact forces and magnitude of the cycloid gear disc. It was also found that the transmission accuracy between the cycloid gear disc and the ring gear is about 98.5%. However, this value is lower than the transmission accuracy of the ring gear pair. The transmission error of the corrected model is about 0.3%. The transmission accuracy is less because of the lower amount of elastic deformation on the tooth flanks.
It is important to note that the most accurate contact forces for each tooth of a cycloid gearbox are not smooth. The contact force on a single tooth starts with a linear rise and then ends with a sharp drop. It is not as smooth as the contact force on a point contact, which is why it has been compared to the contact force on an ellipse contact. However, the contact on an ellipse contact is still relatively small, and the EMBS model is not able to capture this.
The FE model for the cycloid disc is about 1.6 million elements. The most important part of the FE model is the discretization of the cycloid disc. It is very important to do the discretization of the cycloid gear disc very carefully because of the high degree of vibration that it experiences. The cycloid disc has to be discretized finely so that the results are comparable to those of a static FEA. It has to be the most accurate model possible in order to be able to accurately simulate the contact forces between the cycloid disc and the ring gear.
Kinematics of a cycloidal drive
Using an arbitrary coordinate system, we can observe the motion of components in a cycloidal gearbox. We observe that the cycloidal disc rotates around fixed pins in a circle, while the follower shaft rotates around the eccentric cam. In addition, we see that the input shaft is mounted eccentrically to the rolling-element bearing.
We also observe that the cycloidal disc rotates independently around the eccentric bearing, while the follower shaft rotates around an axis of symmetry. We can conclude that the cycloidal disc plays a pivotal role in the kinematics of a cycloidal gearbox.
To calculate the efficiency of the cycloidal reducer, we use a model that is based on the non-linear stiffness of the contacts. In this model, the non-linearity of the contact is governed by the non-linearity of the force and the deformation in the contact. We have shown that the efficiency of the cycloidal reducer increases as the load increases. In addition, the efficiency is dependent on the sliding velocity and the deformations of the normal load. These factors are considered as the key variables to determine the efficiency of the cycloidal drive.
We also consider the efficiency of the cycloidal reducer with the input torque and the input speed. We can calculate the efficiency by dividing the net torque in the ring gear by the output torque. The efficiency can be adjusted to suit different operating conditions. The efficiency of the cycloidal drive is increased as the load increases.
The cycloidal gearbox is a multi-stage gearbox with a small shaft oin and a big shaft. It has 19 teeth and brass washers. The outer discs move in opposition to the middle disc, and are offset by 180 deg. The middle disc is twice as massive as the outer disc. The cycloidal disc has nine lobes that move by one lobe per drive shaft revolution. The number of pins in the disc should be smaller than the number of pins in the surrounding pins.
The input shaft drives an eccentric bearing that is able to transmit the power to the output shaft. In addition, the input shaft applies forces to the cycloidal disk through the intermediate bearing. The cycloidal disk then advances in 360 deg/pivot/roller steps. The output shaft pins then move around in the holes to make the output shaft rotate continuously. The input shaft applies a sinusoidal motion to maintain the constant speed of the base shaft. This sine wave causes small adjustments to the follower shaft. The forces applied to the internal sleeves are a part of the equilibrium mechanism.
In addition, we can observe that the cycloidal drive is capable of transmitting a greater torque than the planetary gear. This is due to the cycloidal gear’s larger axial length and the ring gear’s smaller hole diameter. It is also possible to achieve a positive fit between the fixed ring and the disc, which is achieved by toothing between the fixed ring and the disc. The cycloidal disk is usually designed with a short cycloid to minimize unbalance forces at high speeds.
Comparison with planetary gearboxes
Compared to planetary gearboxes, the cycloidal gearbox has some advantages. These advantages include: low backlash, better overload capacity, a compact design, and the ability to perform in a wide range of applications. The cycloidal gearbox has become popular in the multi-axis robotics market. The gearbox is also increasingly used in first joints and positioners.
A cycloidal gearbox is a gearbox that consists of four basic components: a cycloid disk, an output flange, a ring gear, and a fixed ring. The cycloid disk is driven by an eccentric shaft, which advances in a 360deg/pivot/roller step. The output flange is a fixed pin disc that transmits the power to the output shaft. The ring gear is a fixed ring, and the input shaft is connected to a servomotor.
The cycloidal gearbox is designed to control inertia in highly dynamic situations. These gearboxes are generally used in robotics and positioners, where they are used to position heavy loads. They are also commonly used in a wide range of industrial applications. They have higher torque density and a low backlash, making them ideal for heavy loads.
The output flange is also designed to handle a torque of up to 500 Nm. Its rotational speed is lower than the planet gearbox, but its output torque is much higher. It is designed to be a high-performance gearbox, and it can be used in applications that need high ratios and a high level of torque density. The cycloid gearbox is also less expensive and has less backlash. However, the cycloidal gearbox has disadvantages that should be considered when designing a gearbox. The main problem is vibrations.
Compared to planetary gearboxes, cycloidal gearboxes have a smaller overall size and are less expensive. In addition, the cycloid gearbox has a large reduction ratio in one stage. In general, cycloidal gearboxes have single or two stages, with the third stage being less common. However, the cycloid gearbox is not the only type of gearbox that has this type of configuration. It is also common to find a planetary gearbox with a single stage.
There are several different types of cycloidal gearboxes, and they are often referred to as cycloidal speed reducers. These gearboxes are designed for any industry that uses servos. They are shorter than planetary gearboxes, and they are larger in diameter for the same torque. Some of them are also available with a ratio lower than 30:1.
The cycloid gearbox can be a good choice for applications where there are high rotational speeds and high torque requirements. These gearboxes are also more compact than planetary gearboxes, and are suitable for high-torque applications. In addition, they are more robust and can handle shock loads. They also have low backlash, and a higher level of accuracy and positioning accuracy. They are also used in a wide range of applications, including industrial robotics.
editor by CX 2023-11-13
China SLR47 helical power transmission gearbox speed reducer variator transmission link belt gear reducers electronic variator with Good quality
Applicable Industries: Accommodations, Garment Retailers, Creating Content Stores, Production Plant, Equipment Restore Shops, Food & Beverage Factory, Farms, Cafe, Residence Use, 6mm 1.2V 6V micro hollow cup motor coreless dc motors for Toy product Digital Camera Retail, Foods Store, Printing Stores, Building works , Vitality & Mining, Foods & Beverage Retailers, Other, Advertising and marketing Business
Gearing Arrangement: Helical
Output Torque: 800~100000N.m
Input Velocity: 1400rpm
Output Pace: fourteen-280rpm
Ratio: 7.5~a hundred
Certification: ISO9001-2008
Mount Placement: Foot Mounted
Bearing: C&U,LYC, PTO Travel Shaft T80 Tractor Shaft SKF
Packaging Particulars: Picket packing containers , Cantons packed in 1 pallet
Specification R collection helical in-line motor gearbox velocity reducer decelerator has the functions of high flexibility,great mixture and heavy loading capability, alongside with other deserves these kinds of as easy to attain different transmission ratios, substantial performance, minimal vibrationand substantial permissible axis radial load. This collection can not only be merged with a variety of kinds of reducers and variators and meet up with the demands, but also beadvantage of localization of related transmission tools.1) Output speed: .6~1,571rpm2) Output torque: up to 18,000N.m3) Motor electricity: .eighteen~160kW4) Mounted sort: foot-mounted and flange-mounted mounting
| Merchandise Title | R sequence helical in-line motor gearbox speed reducer decelerator | ||||
| Gear Material | 20CrMnTi | ||||
| Situation Materials | HT250 | ||||
| Shaft Material | 20CrMnTi | ||||
| Equipment Processing | Grinding complete by HOFLER Grinding Equipment | ||||
| Colour | Customized | ||||
| Sounds Examination | Bellow 65dB | ||||
What Is a Gearbox?
A gearbox is the mechanical system of an automobile that allows a vehicle to change gear smoothly. This arrangement of gears is highly complex, which helps to provide a smooth gear change. In this article, we will explore some of the different types of gearboxes, including the Epicyclic gearbox, the Coaxial helical gearbox, and the Extruder helical gearing. These are three of the most common types of gearboxes used in automobiles.
Gearboxes
Gearboxes help drivers choose the appropriate gear for the conditions. A lower gear produces the least speed, while a higher gear gives the maximum torque. The number of gears used in a gearbox varies to meet different demands on the road and load. Short gearing provides maximum torque, while tall gearing offers higher top speeds. These features combine to improve the driveability of a vehicle. But what is a gearbox?
The gearbox has a slew of components, including the bearings and seals. Among these components is the gearbox, which is subjected to wear and tear due to metal-to-metal contact. As a result, gearboxes require close monitoring. Various tests are used to assess the condition of gears, such as corrosion and wear. Proactive tests emphasize wear, contamination, and oil condition. However, there are also proactive tests, such as the ferrous density test and the AN test, which monitor additive depletion and abnormal wear.
The separating force is a key factor for the design of a gearbox. The primary radial measurement point should be oriented to monitor normal forces. The secondary measurement point should be located in the opposite direction of rotation from the primary radial measurement point. The separating force generated by a helical gear set is called tangential force. The primary and secondary radial measurement points should be positioned so as to provide information about both normal and tangential forces.
Manual gearboxes are often manual. The driver can control the synchromesh by using a selector rod. This rod moves the synchromesh to engage the gear. Reverse gears are not synchromesh because they are used only when the vehicle is at a standstill. In older cars, the first gear often lacked synchromesh due to cost or lack of torque. Drivers could still use first gear with a double-declutch.
Coaxial helical gearbox
The R series rigid tooth flank helical gearbox features high versatility and good combination. They have a wide range of motor power and allow for fine classification of transmission ratios. The R series gearbox has several advantages, including high efficiency, long service life, and low vibration. This series of gearbox can be combined with a wide range of reducers and variators. Its size and high performance makes it an ideal choice for applications that require maximum torque and load transfer.
The main feature of a helical gearbox is that it presents a fixed velocity ratio, even if the center gaps are not perfectly set. This is sometimes referred to as the fundamental rule of gearing. A helical gearbox is similar to paper spur gears in terms of radial pitch, since the shafts in the helical gearbox cross at an angle. The center gap of a helical gearbox is the same for both the left and right-handed counterparts.
The EP Series is another popular model of a Coaxial helical gearbox. This series has high torque and a maximum reduction ratio of 25.6:1. It is an ideal choice for the plastic industry, and CZPT offers an extensive range of models. Their center distance ranges from 112 mm to 450 mm. The EP Series has several models with different center distances. In addition to high torque and efficiency, this gearbox has low noise and vibration, and it is easy to assemble and disassemble.
Another type of Coaxial helical gearboxes is the planetary gearbox. They have a high efficiency and power density. Unlike coaxial helical gearboxes, planetary gearboxes have an axis on the same direction as the output shaft. They are easy to integrate into existing drive trains. In addition, they are compact and easy to integrate with existing drive trains. For servo applications, they are another great choice.
Epicyclic gearbox
An epicyclic gearbox is a type of automatic gearbox used to drive cars. Its primary advantage is its compact design, and it is more reliable and efficient than manual gearboxes. It is comprised of a sun gear and two planetary gears, encased in a ring gear called the Annulus. This system is useful for drivers who need to shift gears frequently, as they will become tired if the gears are suddenly changed.
An epicyclic gearbox consists of three different types of gears: ring gear, sun gear, and annular ring gear. The ring gear is the outermost gear and has angular-cut teeth on its inner surface. It is used in conjunction with planetary gears to provide high-speed ratios to vehicles. The sun gear also reverses the direction of the output shaft. This helps reduce transmission error.
An epicyclic gearbox uses multiple planets to transfer power between the planets. This type of gearbox is lightweight and features a high power density. This gearbox has several benefits over a standard single-stage parallel axis gearbox, including multiple load paths, unequal load sharing, and phased meshing. Furthermore, epicyclic gearboxes require more complex transmission error optimisation than their counterparts, including more than one stage.
The objective of epicyclic gearbox research is to provide the lowest transmission error possible. The process includes an initial design and detailed specification. The system is defined by its load spectrum and required ratio. Deflections of the elastic mesh are calculated to understand their strength and how much energy the system can handle. Finally, micro-geometric corrections minimize transmission error. These improvements are crucial to the overall efficiency of an epicyclic gearbox.
Extruder helical gearing
The helix in an extruder helical gearing is fixed at an angle, enabling more interaction with the shaft in the same direction as it moves. As a result, the shaft and the bearing are in constant contact for a long period of time. Typically, extruder helical gearing is used in applications where there is low excitement, such as steel, rolling mills, conveyors, and the oil industry. The bevel gear train also plays a role in these applications.
The CZPT AEX extruder drive gear is specifically developed for this specific application. The gears are compact and lightweight and offer exceptional power density and a long service life. These extruder gears are highly reliable, and they can be used in a wide range of applications, including rubber processing, food production, and recycling plants. CZPT offers both standard and custom gearing for your extruder.
Another advantage of helical gearing is its versatility. Since the helical gearing teeth are inclined at a specific angle, they can be adjusted to meet the specific needs of a given application. These gears also have the advantage of eliminating noise and shock from straight teeth. Unlike other gearing types, they are able to achieve a wide range of loads, from small to large. These helical gears are very durable and are the best option for high-load applications.
In addition to this, asymmetric helical gears have increased flexibility, while asymmetrical helical gears have lower flexural stiffness. The ratio of teeth to the shaft has a positive effect on the strength of the gear. Furthermore, asymmetrical helical gears are easier to manufacture. But before you purchase your next extruder gear, make sure you know what you’re getting into.
1 speed gearbox
CZPT Group Components produces the one speed gearbox. It has the potential to make cars more efficient and environmentally friendly. The gear ratio of a car’s drivetrain is crucial for reaching maximum power and speed. Typically, a one-speed gearbox delivers a maximum of 200 hp. But the speed at which a car can reach this power must be high to get the full benefit from the electric motor. So, how can a one-speed gearbox improve the speed and torque of a car?
A one-speed gearbox is a mechanical device used to switch between second and third gears. It can include multiple gear sets, such as a shared middle gear for switching between second and third gears. It can also have an intermediate gear set that represents a switchable gear in both partial transmissions. The invention also includes a mechanism that makes it easier to change gears. The patent claims are detailed below. A typical one-speed gearbox may include two parts.
Generally, a one-speed gearbox will have up to seven forward gears, with each of these corresponding to a different speed. A one-speed gearbox can have five different gear sets and five different gear levels. It can have synchronized gear sets or last-shelf gear sets. In either case, the gears are arranged in a way that maximizes their efficiency. If the gears are placed on opposite sides of a car, the transmission may be a two-speed one.
CZPT Transmission specializes in the production of high-speed gearboxes. The company’s Milltronics HBM110XT gearbox machine is the perfect tool for this job. This machine has a large working table and a heavy-duty load capacity, making it a versatile option for many kinds of applications. There are also a wide variety of CZPT gearboxes for the automotive industry.
editor by czh 2023-02-17
China manufacturer & factory supplier for Helical in Umuahia Nigeria Geared Motor Gearbox Speed Reducer With Pulley Belt With high quality best price & service
Producer & distributor of roller & wire rope stop chains. Kinds of chains consist of alloy, high tensile transport, higher test & proof coil chains. Programs consist of log chains, cargo lashings, pipe line handing, tailgates, guard rails & change chains.We can supply a complete-selection of electrical power transmission products like chains, sprockets and plate wheels, pulleys, gearboxes, motors, couplings, gears and racks pto shaft, agricultural gearboxes.
EPG main production is of farming 15-500 horsepower tractor supporting equipment, mechanical cultivation, harvesting equipment and components.
Overview
Our patented coupling system C Line is the end result of our information and growth. It permits simple coupling and uncoupling of the PTO drive shaft. The cover provides the person a lot more ease and comfort since of its ergonomically and compact type. The users’ security is confident, due to the fact he simply cannot get entangled in protruding areas of the yoke. There is also much less dust existing at dealing with and there are much less difficulties related with it.
Rapid Particulars
- Applicable Industries:
-
Building Materials Shops, Production Plant, Equipment Restore Shops, Farms, Building works , Meals & Beverage Retailers
- Gears:
-
Helical Gears Transmission Gear Box
- Ratio:
-
one.3~289.seventy four
- Application:
-
Power Transmission
- Solution title:
-
Gearbox
- Coloration:
-
RAL5010(blue)
- Warranty:
-
twelve Months
- Mounting Placement:
-
Horizontal (foot Mounted)
- Packing:
-
Wood Box
- Customization:
-
Appropriate
- Housing Substance:
-
Iron Casting
Packaging & Shipping
-
Lead Time
: -
Quantity(Packing containers) 1 – 1 >1 Est. Time(times) fifteen To be negotiated
Online Customization
EPG is a loved ones owned tiny firm that is located in China We offer mechanical energy transmission parts including: V-Belts – All sorts Chains – ANSI, Conveyor, Metric, Leaf Sprockets – ANSI normal, Conveyor, Forged Gears – Spur, Rack, Miter, Bevel, Worm, Metric Couplings – Flange, Jaw, Chain, Rigid, Zero Backlash AC & DC Motors and Controls Belt Drives, Synchronous and Non-Synchronous Bearings – Ball, Roller, and Mounted
Characteristics
Higher modular design.
Integrated casting housing,compact dimension,higher loading assistance, secure transmitting and minimal noise stage.
Ideal oil leakage protecting against tends to make the great sealings and can be utilised in wide selection of sector.
This series is special for pug mill.
High performance and save electrical power.
Conserve cost and reduced maintenance.
Main utilized for
Chemical agitator
Hoist and transport
Metal and metallurgy
Electric powered electricity
Coal mining
Cement and building
Paper and light market
Housing material | Cast iron/Ductile iron |
Housing hardness | HBS190-240 |
Equipment material | 20CrMnTi alloy steel |
Area hardness of gears | HRC58°~sixty two ° |
Equipment main hardness | HRC33~40 |
Enter / Output shaft materials | 42CrMo alloy steel |
Enter / Output shaft hardness | HRC25~thirty |
Machining precision of gears | exact grinding, 6~5 Quality |
Lubricating oil | GB L-CKC220-460, Shell Omala220-460 |
Heat remedy | tempering, cementiting, quenching, etc. |
Performance | ninety four%~96% (relies upon on the transmission stage) |
Sound (MAX) | 60~68dB |
Temp. rise (MAX) | 40°C |
Temp. increase (Oil)(MAX) | 50°C |
Vibration | ≤20µm |
Backlash | ≤20Arcmin |
Manufacturer of bearings | China leading brand name bearing, HRB/LYC/ZWZ/C&U. Or other makes asked for, SKF, FAG, INA, NSK. |
Brand name of oil seal | NAK — Taiwan or other manufacturers asked for |
Q: Are you buying and selling business or producer ?
A: We At any time-Electricity Group one particular of the biggest transmission suppliers in the planet are factory.
Q: How long is your delivery time?
A: Usually it is 5-10 times if the products are in stock. or it is 15-20 days if the items are not in inventory.
Q: Can we acquire 1 personal computer of every merchandise for high quality tests?
A: Yes, we are happy to take demo purchase for good quality tests.
Q: What is your conditions of payment ?
A: Payment=1000USD, thirty% T/T in progress, stability prior to shippment.
If you have other concern, freely to contact us,remember to.
Automobile manufacturer made in China – replacement parts – in Paris France Parts Engine Belt Tensioner Pulley for Toyota Hilux Vigo 2kd 16620-0L020 with top quality
We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828
Product Dscription
Tensioner pulley 16620-0L571
| Item name | Tensioner pully |
| EPT No. | 16620-0L571 |
| Car Model | Toyota Hilux Vigo |
| Engine No. | 2KD |
| Package | According to custorm requirement |
| Specification | Standard as OEM |
| Delivery small quantity | about 3-7 days |
| Delivry large quantty | about 15-30 days |
| MOQ | 12PCS |
| Warrant time | 12 months or 30000 KM |
Product Shows
COMPANY PROFILE
HangZhou Xinghan Auto Parts Co., Ltd. founded in 2015, has been focusing on Toyota, Nissan, Honda and EPT Japanese mode EPT chassis and engine parts sales and research and development about ten years.We have been developed:wheel hub bearing, ball joint,brake caliper, steering knuckle,control arm,shock absorber,water pump,belt tensioner pulley,engine mounting,hood lock etc.Company has registered “HEDLOK” independent brand, and always adhere to the” brand as the direction of development, quality as the root, integrity as the way of development “business philosophy, the products exported to domestic and foreign major auto parts market, and by the majority of customers unanimously recognized and favored; your support is our eternal power, your satisfaction is our unremitting pursuit! We will carry the dream and mission, continue to move forward, create brilliant! Company vision :” Let the world fall in love with made in China! “
Wakerhous&Machine
Warehouse &package
Shipping&Payment
FAQ
Q1:Can you support to the sample order?
A:Yes,we can supply the sample if we have parts in stock,but the customer have to pay the sample payment and shipping cost.
Q2:What is the payment method?
A:T/T,Western Union,Paypal,MoneyGram
Q3:What is your shipping logistic?
A:DHL,EMS,epacket,TNT,FedEx and etc.
Q4:What is your goods of packing?
A: EPT white or brown boxes and brand boxes.If you have have any EPT packing request,please contact us.
Q5:What is your payment terms?
A:T/T 30% as deposite prepare the goods,and 70% as balance before shipping the goods.We will show you photo before we ship the goods.
Q6:How about your delivery time?
A:In generally,delivery time is about one week after we recieve your advance payment,this is depend on your quantity of your order.
Q7:How can you guarantee the quality?
A:Before delivery,we wil te EPT the products to make sure them work well.And we have 12 months of warrant time.If you meet with quality problem,we wil promies to replece or reture in our warrant time.
Q8:Are you a factory or trade company?
A:We manufacture and trade.
Q9:Can your campany accepte order by sample or EPT No.?
A:Your sample is welcome,if give EPT No.we mu EPT check right together.
Q10:How do you make our business long-term and keep good relationship with your customer?
A|:We keep high quality and competitive price to ensure our coustomer benefit,we respect our every customer as our friend,and we sincerely do business with them no matter where they come from.
We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.
China Chain and sprocket factory : 7920 leaf chain roller China in Jambi Indonesia Series Hairise Fruit Industry Modular Belt with ce certificate top quality low price
We – EPG Team the largest Chain and agricultural gearbox manufacturing facility in China with 5 distinct branches. For a lot more particulars: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
we offer chromed bar and tubes for hydualic and pheumatic cylinders, pto shaft, agricultural gearboxes etc. engineering We are searching forward to developing profitable organization interactions with new customers all around the entire world in the foreseeable future.class chains & precision roller chains. Solitary strand chain, multi-strand chains, double pitch chains, corrosion resistant chains, self-lubricating chains, attachment chains, leaf chains, and specialty chains. engineering course chains & precision roller chains. Single strand chain, multi-strand chains, double pitch chains, corrosion resistant chains, self-lubricating chains, attachment chains, leaf chains, and specialty chains. EPT 7920 Flush Grid Plastic EPT Belt sixty six% Open up
| 1 | Name | Har 7920 Collection Belts |
| 2 | Pitch | 27.9mm |
| three | Thickness | 11mm |
| 4 | Content | POM/PP |
| five | Pin content | Plastic |
| 6 | StHangZhourd | ISO9001:2000 |
| 7 | Export markets | Global |
| eight | Area | ZheJiang |
| 9 | Manufacturer | Hairise |
Goods present:
Main item:
| Mujia EPT Technological innovation (ZheJiang ) Firm Restricted | ||||||
| group | Product classification | |||||
| 1.slat best chains | Plastic slat prime chains | |||||
| Steel desk best chains | ||||||
| Multiflex conveyor chains | ||||||
| Flexible chains | ||||||
| two.Modular belts | Slab modular belts | |||||
| Grid modular belts | ||||||
| 3.Accesssories of conveyor | Plastic comb boards | |||||
| Sprockets | ||||||
| Rails | ||||||
| Steel chains | ||||||
| Neck guides | ||||||
| EPT rollers | ||||||
| Belts | ||||||
| Canned tuna parts | ||||||
| 4.Transmission equipment | Chain conveyor | |||||
| Chain community conveyor | ||||||
| Metal mesh conveyor | ||||||
| Roller conveyor | ||||||
| Belt conveyor | ||||||
| Upgrade conveyor | ||||||
| Screw conveyor | ||||||
Rewards of Hairise:
1.We are the OEM ,so we can give the products in accordance to your needs.
2. High good quality services and historical reputation.
3. Lower cost with superior top quality and substantial functionality.
4.timely shipping and fantastic client service.
Firm Profile:
Mujia EPT Engineering (ZheJiang ) Business Minimal
We specialised in the field of transmission equipment for 16 years, masking plastic slat leading chains, plastic modular belts, stainless metal chain, mulitiflex conveyor chains, flexible chains, conveyor add-ons, chain conveyor, chain community conveyor, metal mesh conveyor, roller conveyor, belt conveyor, improve conveyor, screw conveyor, inclined conveyor and so on. Make sure you re EPT assured that customise is also accessible.
Our merchandise has handed ISOISO9001 international top quality method authentication, CE, Fda, SGS and so on. Researching and developing new merchandise repeatedly. On the foundation of mutual advantage, we will meet your specifications with sufficient stock, reasonable value and complete services techniques.
Our products are extremely well-liked in many international locations, this kind of as The usa, Britain, Italy, Russia, France, Poland, Spain, France,Thailand, Australia, Bangladesh, Brazil,Canada, Chile, Denmark, Egypt, Finland, Germany, Ghana, Greece, India, Indonesia,Eire, Japan, Korea, Kuwait, Mexico, Morocco, Netherlands,Pakistan,Sweden,Turkey, United Kingdom, Venezuela, Vietnam, Vietnam and so on.
Why pick Us:
1. We are a manufacturer of plastic chains/ belts/ PU/PVC/Rubber belts/ EPT factors and conveyors for tobacco/ bakery/ sea meals/ cans/ meat/ fruit & vegetable sector generating line.
2. We can offer you free samples of plastic chains/ belts/ PU/PVC/Rubber belts/ EPT elements for your testing.
three. We have engaged in analysis & development and generation of plastic chains/ belts/ PU/PVC/Rubber belts/ EPT components in excess of 16 many years, we are skilled.
four. We use food quality uncooked content–Dupont Delrin from ZheJiang , to make tobacco/ bakery/ sea foodstuff/ cans/ meat/ fruit & vegetable sector generating line plastic chains/ belts.
five. Engineers fly to your site for factory plHangZhou and installing if needed.
six. We can provide distinct te EPT certifications as your prerequisite, ISO,CE, Food and drug administration, SGS.
seven. We have our possess manufacturing unit, strict quality manage section makes certain great top quality with reasonable cost.
eight. Total solution line: You can purchase all sorts of goods related to conveyor from us.
9. We can customise the merchandise according to your specifications.
10. Sufficient stocks for stHangZhourd merchandise.
Benefits of the EPT product:
1. Simple to cleanse, easy to put in.
two. Particular kinds give excellent grip on inclination.
three. Rugged, substantial strength – low stretch characteristic.
four. Low functioning noise and costs, reduced routine maintenance, superb sturdiness.
5. Very good high quality with affordable value, well timed delivery and fantastic customer services.
six. Ample shares for stHangZhourd elements, so we can fulfill your urgent demands.
7. Non-stHangZhourd is obtainable, we can personalize it in accordance to your in depth specification.
8. Comprehensive merchandise line, our manufacturing unit can offer all types of goods relate to conveyor.
nine. Warmth resistance, abrasion resistance, corrosion resistance, chemical resistance, Super wear resistance.
FAQ:
Q1. In which is your manufacturing facility positioned? How can I visit there?
A: All our clientele, from property or overseas, are warmly welcomed to pay a visit to us. Ahead of you pay a visit to our company, we can link by phone! Our organization is located in ZheJiang , China, close to the ZheJiang Xihu (West Lake) Dis.ao Intercontinental Airport. And our manufacturing unit is in ZheJiang HangZhou, we will prepare autos to there.
Q2. I will not know what belt I currently use. Can you help me identify my belt?
A: Our on the web belt identifier can assist you slim down the collection and type of your recent belt. If you want more distinct info on plastic conveyor chain belt areas producers, get in touch with me freely for plastic chains/ belts/ PU/PVC/Rubber belts/ EPT components and conveyors.
Q3. What can you do If the goods were broken?
(1) If products had been damaged as soon as you purchased from me,I would replace them freely according to the established pictures.
(2) If the items had been damaged when you used, we could provide 5 year top quality assure for plastic conveyor chain belt parts manufacturers underneath typical doing work environment.
This fall. Does EPT provide PDF data files of products?
A: Of course, in our down load heart you can locate PDF documents for a large amount of our merchandise.If you can not locate what you are looking for, send me your reque EPT by email or speak to me on Wechat or Whatsapp freely.
| Make contact with particular person | Nicole Hou |
| Cell: +86~13083988828 | 15249672302 |
The use of authentic equipment manufacturer’s (OEM) part figures or logos , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our business and the shown replacement parts contained herein are not sponsored, approved, or produced by the OEM.
Horizontal made in China – replacement parts – in Pointe-Noire Congo Curved Auto Belt Conveyor with ce certificate top quality low price
We – EPG Group the bigge EPT Chain and agricultural gearbox factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828
Product Description
Application range of Belt Conveyor
Belt conveyors can be widely used in coal, mining , metallurgical , ports and wharf, chemical, petroleum and mechanical industry, to transport various kinds of bulk materia EPT and mass materials.
Bulk material such as coal,lime stone,irono ore and clean coal,etc,.
Belt conveyor features:
1. Large conveying capacity and longer conveying distance, up to 20km or longer
2. Can conveyor various kinds of bulk material and itemized goods with bulk density of 0.5~2.5t/m³
3. Can adopt combined conveying mode of convex curved segment,concave curved segment or straightline segment.
4. According to different transportation request, it can be single used or multiple combined using, also can be used together with EPT equipments to organize a horizontal or declining conveying system.
5. It can be used between -25ºC~+60ºC working environment, temperature of conveying material under 80ºC with high adaptability.
Different Industries Application
EPT Technical Parameter
| Belt speed (m/s) | Belt width (mm) | ||||||||||
| 500 | 650 | 800 | 1000 | 1200 | 1400 | 1600 | 1800 | 2000 | 2200 | 2400 | |
| Conveying capacity (T/H) | |||||||||||
| 0.80 | 69 | 127 | 198 | 324 | |||||||
| 1.00 | 87 | 159 | 248 | 405 | 593 | 825 | |||||
| 1.25 | 108 | 198 | 310 | 507 | 742 | 1032 | |||||
| 1.60 | 139 | 254 | 397 | 649 | 951 | 1321 | |||||
| 2.00 | 174 | 318 | 496 | 811 | 1188 | 1652 | 2186 | 2795 | 3470 | ||
| 2.50 | 217 | 397 | 620 | 1014 | 1486 | 2065 | 2733 | 3494 | 4338 | ||
| 3.15 | 871 | 1278 | 1872 | 2602 | 3444 | 4403 | 5466 | 6843 | 8289 | ||
| 4.00 | 1622 | 2377 | 3304 | 4373 | 5591 | 6941 | 8690 | 10526 | |||
| 4.50 | 2674 | 3718 | 4920 | 6291 | 7808 | 9776 | 11842 | ||||
| 5.00 | 2971 | 4130 | 5466 | 6989 | 8676 | 10863 | 13158 | ||||
| 5.60 | 6122 | 7829 | 9717 | 12166 | 14737 | ||||||
| 6.50 | 9083 | 11277 | 14120 | 17104 | |||||||
CE Certificate
Our E EPT Project in different industry
Our Workshop
Company Introduction
HangZhou Xihu (We EPT Lake) Dis.ng Heavy Industry EPT Co., Ltd is specialized in designing , developing and manufacturing innovative and systematic conveying machinery such as belt conveyor, pipe conveyor, bucket elevator, screw conveyor, conveyor rollers, conveyor idlers, conveyor pulley, and various kinds of components related to the conveyors, which mainly applied for mining, coal, metallurgy, power plants, dork, sea ports, grain, chemical, and EPT bulk material transmission industries.
HangZhou Xihu (We EPT Lake) Dis.ng established since 2001 with total registered capital of RMB 108 million, it covers an area of 80,000 square meters with construction area of 26,000 square meters, existing over 400 technical engineers and skilled workers. There are more than three hundreds sets of specialized production equipments and testing machines to guarantee for the advanced technology and high quality.
Contact us:
Contact person: Merry Lee
Tel: +86-391-3955001 Phone: +86~13083988828 13858117778939191031
Address: Xihu (We EPT Lake) Dis. Ea EPT Road No.827, HangZhou,ZheJiang ,China
Website:
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.
Best made in China – replacement parts – pintle Chain & sprocket manufacturer : 5935 SLF820 K325 Table Top Chain in Mysore India Food Vacuum Top Modular Conveyor Belt for Food Transportation Machine with ce certificate top quality low price
We – EPG Team the most significant Chain and agricultural gearbox manufacturing unit in China with 5 different branches. For much more details: Cellular/whatsapp/telegram/Kakao us at: 0086-13083988828
The new items incorporate a sequence of large-tech and higher good quality chains and sprockets and gears, such as chains and gearboxes for agricultural machineries, metallurgical chains, escalator stage-chains, higher-velocity tooth chains, timing chains, self-lubrication chains, amid which have variety substantial speed tooth chain for automobile department dynamic box and aerial chains fill in the blanks of chain in China. EPG Much more importantly, we make particular components according to provided drawings/samples and warmly welcome OEM inquiries. major company and provider of ball bearings and electricity transmission tools. Considering that it’s starting in 1992, EPG has grown into 1 of the top suppliers in the market. Key factors that have contributed to our growth is our devotion to the fundamentals of revolutionary design, competitive pricing, exceptional client services, and product availability. We’ve built up our product variety to reply to the vastly distinct situations located in different industrial environments about the world. From weighty industry to precision production, we function with conclude-users in virtually each and every sector and have professional remedies which are verified to offer you a unique overall performance edge for your application.
food vacuum 5935 plastic leading modular conveyor belt
Merchandise specifics:
| Item Name | plastic tabletop chains |
| Material | PP POM |
| Coloration | as request |
| Pitch(mm) | 19.05 |
| opening ratio | six% |
| Certificate | ISO Food and drug administration SGS |
| MOQ | 10 meter |
| Port | HangZhou |
Application:
Glass bottle,plastic bottle,metallic container,plastic baggage ,carton label foods,beverage,plastic bottle,
metallic contaciner,plastic bags,Prescription drugs,Electron, Chemical Business, Auto: +86~13083988828 Portion.
Business introduction:
Shangdong EPT Transmission Gear Firm Specializing in many sorts of conveyor devices over thirty years.
Mainly for Modular conveyor belt,plastic slat chain,metal top chains,flexible chains and conveyor components.
With our personal design and style, study & development crew,We will give you with realistic price tag and be EPT of top quality assurance.
Welcome to our manufacturing unit.
Certification:
Our Provider:
1. Your inquiry will be replied inside 24 hours and on the internet services is available all the time.
two. EPT educated & professional income persons are listed here ready to solution all your queries and handle the difficulties.
3. Supply time: in 5~twenty five times following agreement.
4. Payment phrases: T/T, L/C, O/A, Western Union, Paypal, Escrow, and many others.
5. Great following-sale service presented, please get back if you got concern.
get in touch with:
Please ship inquiry to get cost or catalog
The use of authentic equipment manufacturer’s (OEM) portion numbers or emblems , e.g. CASE® and John Deere® are for reference purposes only and for indicating merchandise use and compatibility. Our company and the outlined replacement areas contained herein are not sponsored, accepted, or created by the OEM.
Professional Cost made in China – replacement parts – in Voronezh Russian Federation Wholesale T Toothed Timing Belt Idler Pulley with top quality
We – EPG Team the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears manufacturing unit in China with 5 distinct branches. For a lot more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828
>> If you receive top quality difficulties with the product, remember to make contact with us in time and handle it properly for you.
>> You need to provide tooth profile, tooth quantity, belt width, bore diameter, amount and variety. You should deliver us drawings to get our be EPT quotation.Thanks
| Item title | Belt pulley / Timing pulley | |
| Teeth profile | Arc toothed | HTD3M, HTD5M, HTD8M, HTD14M, HTD20M, Gt2, Gt3, Gt5 |
| Arc Gt toothed | Gt2,Gt3,Gt5 | |
| Trapezoidal toothed | MXL, XXL, XL, L, H, XH, XXH | |
| T-toothed | T2.5, T5, T10, T20 | |
| AT-toothed | AT3,AT5,AT10,AT20 | |
| S-toothed | S2M, S3M, S4.5M, S5M, S8M, S14M | |
| Parabolic-toothed | P2M, P3M, P5M, P8M, P14M | |
| Y-toothed | G2M, G3M, G5M, Y8M | |
| Tooth Quantity | 10-a hundred and fifty tooth or personalized | |
| Interior Bore | 2-200mm H7 precision or tailored | |
| resources | Carbon metal, aluminum alloy frequently used, brass and ca EPT iron offered. | |
| Surface area treatment | Anodize, Black Oxide, Phosphate and Galvanization. | |
| Specification | EPT serice, strictly according drawing and samples | |
| Application | Machining, Mining Accessories, EPT Accessoried, EPT Parts, Automobile Components, Industrial Elements, and so forth | |
| FEATURE#1 – Precise transmission – Stability – Lower noise – No slip |
|
| FEATURE#two – Multi-axis transmission – Oil resistant – Dampness proof – No lubication needed |
|
| FEATURE#3 – Security & Eco-welcoming – Wide range of apps – Assist customization |
HangZhou EPT Rubber & Plastic Co.,Ltd
Established in 2008, Is a Specializing in the generation of agricultural/industrial equipment parts, at present making timing belts, conveyor belts, crawlers, synchronous wheels, gears, bearings, engines and EPT spare parts. Our items are SGS, RoHS, M1 and UL qualified,Our manufacturing facility is situated in Zhangting Industrial Zone, Xihu (We EPT Lake) Dis., HangZhou, which is only 50 kilometers away from the popular HangZhou Port (Harbor). addresses an region of 9,000 sq. meters, with 6,000 sq. meters’ normal workshops and entire world-course gear, we have exported our items to several worldwide marketplaces such as the British isles, Southea EPT Asia, France, Australia, Canada, etc.You should feel cost-free to make contact with us for a lot more data.
==================================== FAQ ======================================
1) Q: I have not accomplished enterprise with you ahead of, how can i tru EPT your firm?
A: Our business are made-in-china golden supplier and handed Subject certification by manufactured-in-china. What is actually more,we’ve acquired authority certificates for ISO9001.
2) Q: How is good quality ensured?
A: All our procedures strictly adhere to ISO9001:2008 methods, we have rigorous high quality control from creating to delivery,a hundred% inspection by professional screening centre. Little samples could be presented to you for screening.
3) Q: Can i get 1 or a lot more samples?
A: Of course, sample orders welcomed.
4) Q: Do you give any reductions?
A: Sure, we’ll surely attempt my be EPT to assist you get the be EPT cost and be EPT services at the same time.
five) Q: How to Personalized-made(OEM/ODM)?
A: Make sure you send out you item drawings or samples to us if you have, and we can custom-made as you needs.We will also offer skilled advices of the merchandise to make the style to be improve the performance.
We – EPG Team the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears manufacturing facility in China with 5 different branches. For more details: Cellular/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828 The use of original gear manufacturer’s (OEM) element figures or trademarks , e.g. CASE® and John Deere® are for reference functions only and for indicating product use and compatibility. Our business and the outlined substitution areas contained herein are not sponsored, authorized, or made by the OEM.
Belt shop made in China – replacement parts – in Kampala Uganda Tensioner Pulley for Sinotruk Truck Engine Parts Vg1062060113 with top quality
We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828
| Port: | HangZhou |
| Payment Terms: | L/C,D/A,D/P,T/T,Western Union,MoneyGram |
| Brand Name: | seedqun(ZQ) |
| Type: | Engine Assembly |
| Place of Origin: | ZheJiang China |
| Type Engine: | heavy duty truck |
| OEM: | VG1062060113 |
| Size: | EPT Standard Size |
| OE NO.: | VG1062060113 |
| Material: | aluminum |
| Model Number: | belt tensioner pulley |
| MOQ: | 10 PCS |
| Name: | belt tensioner |
| Packaging Detail: | The default is neutral packaging, there is special packaging needs, please contact our company, we will give you the be EPT service . |
We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.