Worm drive gearbox with motor
A robust worm-drive gearbox powered by an MM28 electric motor. Ideal applications where a simple to match, high torque result is required. Ideal for student based projects including robots and buggies.
The machine has been designed to ensure that the output shaft can be ‘clicked’ in and out for modification. Electronic.g. reducing to size. The electric motor is snap installed into its cradle to activate the apparatus and worm.
Details
1 – 6V DC
0.1A to 1A depending on load
Driveshaft length: 12.5cm
Driveshaft diameter 3mm
Gearbox ratio: 42:1
General dimensions of box + motor: 35(W) x 40(H) x 60(L)mm
The primary feature of this high-efficiency gear box is a worm gear, which locks the output shaft whenever the electric motor isn’t turning. The high equipment ratios of 216:1 or 336:1 get this to gearbox appropriate for little strolling robots, lifting mechanisms, and other applications where high torque can be desired.
The low-voltage motors in the worm gearbox operate on 1.5-4.5 volts and draw up to a few amps, making them ideal candidates for the DRV8833 motor driver carrier. Engine overheating can be due to excessive stalling, even at suprisingly low voltages. We recommend that you utilize stall-detection sensors, or simply view your robot, to ensure that it doesn’t stall for lots of seconds at the same time.
This gearbox includes a 4 mm diameter, round output shaft, which works with the wheels that are appropriate for Tamiya 4 mm, round shafts. Our 3 mm universal mounting hub also fits on the smaller threaded end of the shaft, although it is not particularly designed to work with this type of shaft (the hub’s set screw could damage the thread on the shaft).
Ever-Power gear motors are economical, right-angle, worm-geared motors that install easily in the tightest applications. Economical correct position worm geared motors set new requirements for reliability, efficiency and economy with unparalleled features which includes hollow shafts in the tiniest sizes. An inverter friendly design provides for easy integration at this point and a really future proof alternative. The Ever-Power gear motor offers total versatility in mounting choices includes shaft, base, encounter, and flange solutions. The engine terminal box could be mounted in alternate positions rotated in 90º steps around the electric motor frame offering for unparalleled integration possibilities.
Ever-Power gear motors adhere to North American and International criteria, including NEMA, IEC, CSA, and CE, the Ever-Power series allows for worldwide acceptance, a true total solution for our global clients.
Superior protection of IP65 acc. to IEC 529 assures you that the Ever-Power series is dust tight and hose evidence,and can be used outdoors or in wet and dusty environments without the usage of additional enclosures. Complete rated output is offered by the output shaft of the unit.
Product Features
Power ranking up to 5,5 kW.
Torque 25 … 1.000 Nm
Output Speeds 0,2 … 300 min-1
versatile installation possibilities
Totally enclosed, sealed against dust and water spray
Lubrication change 1st after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50/60Hz
Enclosure IP65 (Regular), IP66 (Optional)
Additional features:
Connecting with Connect connectors.
With included inverter up to 7,5kW.
Ever-Power-Mark
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to EN 60034
Corrosion category based on DIN ISO 12944-5
C1, C2, C3, C4, C5-I, C5-M
DC WORM GEAR MOTORS
Ever-Power DC worm equipment motors are the answer for applications requiring a corner turn, optional dual result, or an inability for the motor to be back again driven. The DC correct angle equipment motors are made for constant and intermittent duty operation. Our right angle equipment reducers were created with many mounting plate choices, making them well suited for a variety of DC electric motor based applications. We offer 12 ratios ranging from 5:1 to 100:1.
10309
FEATURES
1/43 to 3/8 HP
12, 24, 90, 130, 180 VDC, 115 FWR
9 – 475 RPM
1.5 – 315.9 in-lb rated torque
Frame Size 60, 80, 108 mm
5:1 – 100:1 standard ratios
Regular brush life of 2000+ hours (varies by application)
EP Products Worm Equipment Motors are made to generate high torque in a small package size. Worm Gear Motors are great for applications that require a self- locking or breaking feature since the result shaft can’t rotate when there’s no power applied. Additionally, Worm Gearheads can transfer movement in 90 degrees. With various decrease ratios, precision cut gears, voltages and sizes, EP Items has a DC Worm Gear Motor solution for your application.
Features and Benefits
Very High Torque Capabilities
Self-Locking / Braking Features
Motion Transfer of 90 Degrees
Capability to Handle Large Gear Decrease Ratios
High Durability
Low Noise
Flexible Configuration
Applications
Protection Door Locks / Industrial Conveying Systems / Security Gates / Dental care Chairs / Ambulance Cots & Stretchers Many of our DC Motors could be complimented with one of our Worm Gearheads. EP Products will work with you to create and manufacture a Worm Gear Engine that will optimize the functionality of your specific application.
Built to your unique requirements
Electric motor Type: Brushed / Brushless / Coreless
Voltage
Output Speed
Power
Current
Torque
Reduction Ratio
Shaft Material & Size
Gear Material
Shaft Configuration: (D Cut / Round / Splined / Other)
Overall Size Parameters (L, W, H)
Encoder Type: Optical / Hall Effect
Extra Assembly Requirements (lead wires, connectors, etc.)
INTRODUCTION
The turbo metal gear worm motor uses a metal gear box for durability and a higher torque output. Due to the special mechanical structure of the worm drive the motor output shaft is definitely self locking and may not be rotated.
This part runs on the two wire connection and supports direction control and also PWM speed control. Ranked voltage is 12v and can attain 40RPM, with a torque of 8kg/cm.
SPECIFICATION
Operating Voltage: 6 – 15 V
Rated Voltage: 12V
No-load Speed: 40 RPM
No-load Current: 35 mA
Rated Torque: 32 RPM
Rated Current: 180 mA
Ranked Torque: 2.2 kg.cm
Rated Power: 1.1 W
Stall Torque: 8 kg/cm
Stall Current: 1 A
Reduction Ratio: 1:150
Weight: 167 g
EP Geared Motors with Worm Gearing – Modual & Customizable drive technology
Worm gear units from EP DRIVESYSTEMS especially show their power in applications where high equipment ratios are essential. Our worm geared motors are therefore optimally suited for use in intralogistics, packaging technology and the meals & beverage industry.
Four great known reasons for EP worm geared motors:
Rugged
Our worm geared motors have a high overload capacity
Maintenance Friendly
Washdown versions allow simple and effective cleaning of the drive system.
Corrosion protection
The NSD tupH sealed surface area conversion is exceptionally chemical, corrosion and abrasion resistant.
Flexibility
Our modular style give users optimum freedom.
The modular system for optimum flexibility: Our EP worm gear units
There are many applications that require drive systems, and each of these has its own unique requirements. The EP series worm equipment motors can be quickly and efficiently adapted to fulfill your needs.
Worm gear devices impress with their high power density and small design. If required, we are able to also supply them with the highly effective nsd tupH surface treatment.
As well as the basic EP housing, you can expect an extensive type of bolt-on parts to customize the worm motor merchandise including torque arms, shaft covers and output flanges. These could be quickly field installed, but we may also be glad to assemble the individual components for you.
Discover more about the modular SI worm geared motors!
Find out more
Smooth and Clean: The EP worm equipment unit SMI
SMI worm gear units feature a soft, corrosion-resistant alluminum alloy housing. Optional nsd tupH surface conversion makes the product ideally suited for harsh and challenging industries like meals processing and pharmaceuticals.
Versatile input designs such as for example NEMA, IEC or immediate motor mounts in extra foot or flange mounted casing designs.
Worm geared motors
Worm geared motors for little power range.
The WATT small worm gear unit adapt themselves concerning UNIBLOCK design optimally in the geared electric motor program. The units have on all sides different fixing possibilities and enable a simple assembling for the client.
Various other drive configurationscan be designed by use of built-on add-ons (e.g. torque arm and output flanges). The housings are made in light weight construction out of aluminium die cast. Electric motor attachment is realised generally by means of IEC adapter B5 or B14A.
Technical Data
Number of sizes:5
Power Range:0.12 – 2.2kW
Output torque range:17 – 230Nm
Ratio:5 – 100
Output option:output shaft, output shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly/installation:uniblock, flange, torque arm
Purchase Worm Drive Gearbox with Engine – incorporating the next features: 1 to 6V voltage ranking, 17100 rpm no load acceleration, 220g-cm stall torque, 3mm shaft diameter, 60mm long, 35mm wide, 40mm high, a robust worm drive gearbox powered by an MM28 electric motor (included), most suitable for applications where a simple to match, high torque result is necessary, nylon housing and equipment, requires light essential oil or silicon grease lubrication, ideal for student based tasks including robots and buggies.
Most suitable for applications where an easy to match, high torque result is required
Perfect for student based tasks including robots and buggies
Reversible High torque Turbo Worm Gear Engine JGY370 DC 12V 40RPM
Reversible High torque Turbo Worm Gear Electric motor JGY370 DC 12V 40RPM
Features:
The motor is Gear DC electric motor with micro-turbine worm, you can transform the wiring-connection to change motor rotation.
Turbo worm geared engine with self-lock, that’s, in the case of motor without electric, the output axis is certainly fixed, self-lock.
The reducer output shaft arranged vertically with the motor shaft, whole electric motor output shaft relatively-short than general gear engine, trusted to be installed the dimensions requirements strictly occasion.
Specifications:
Model: JGY370
Voltage: DC12V
No load speed: 40r/min
Result torque: 5.6kg.cm
Rated current: 0.06A
Weight: 163g
Application: open the home window, door, Mini winch. Ect.
In sumo robot or combat robot competition where high holding torque’s electric motor is essential in order to avoid your robot being pushed by your opponent robot. The worm equipment is certainly a better option compared to the spur gear motor. How come worm gear so special? Check this wiki out: Worm Drive.
“Unlike with ordinary gear trains, the direction of transmission (insight shaft vs result shaft) is not reversible when using large reduction ratios, due to the better friction involved between your worm and worm-wheel, when usually a single start (1 spiral) worm is used. This can be an advantage when it’s desired to get rid of any probability of the output driving the input.”
In other phrases, it is tough to push your load (example, your robot) if the motor isn’t power or rotate.
Features and Spec:
Metal gear box
Output shaft is self-locking because of the worm gear’s characteristic
Rated voltage: 12V DC
Rated output speed: 150 RPM
Rated output torque: 117mN.m (1.2kgf.cm)
Stalled torque: 196mN.m (2kgf.cm)
No load current: 60mA
Stalled current: 1.8A
Output shaft diameter: 6mm with 4.5mm slot
Weight: 150g