Product Description
INTRODUCTIN FOR GEARBOX TMG5713
1.Over view
The CHINAMFG 5713 type hydraulic transmission (hereinafter referred to as the transmission) consists of a YJH315 type hydraulic torque converter and a transmission with 4 CHINAMFG gears and 3 backward gears.
YJH315 The hydraulic torque converter is a single-stage two-phase integrated torque converter, with the characteristics of high efficiency and large torque change ratio. The gearbox is downshaft type, with the front 4 and rear 3 shift function, built-in working oil pump, external force port.
2. Main technical parameters
| Rated input power of the matching engine | 75kW |
| Rated input speed of the matching engine | 2400r / min |
| Input shaft steering (facing the transmission output) | counter clock wise |
| Working fluid | No.6 or No.8 hydraulic transmission oil |
| Main oil pressure and retaining oil pressure | 1.6MPa~1.9MPa |
| Torque converter oil inlet pressure | 0.4MPa~0.8MPa |
| Torque converter oil return pressure | 0.22MPa~0.4MPa |
| Working oil temperature | 80ºC ~100ºC |
| Rated voltage of the solenoid valve | DC24V |
About TMG
CHINAMFG is a professional trackless mining equipment, engineering equipment manufacturer.Our production base is located in HangZhou, ZheJiang .
Our products include: underground trackless mining equipment (underground loaders, underground mining trucks, utility vehicles, drill jumbos, drivetrain system transmission, torque converter, axle); engineering equipment ( wheel loaders, backhoe loaders, excavators, telescopic handlers,graders, articulated dump trucks); drive-train system (transmission, torque converter, axle).
Besides,as a technology oriented enterprise, we also provide customers with solutions including drive-train system customization, vehicle transformation and project contracting etc.
| Improvement | |||||||
| The torque converter is easy to heat up | |||||||
| Inability to climb hills | |||||||
| Climbing long slopes is prone to overheating | |||||||
| Punch | |||||||
| Easy to burn the friction plate | |||||||
| Loud noise | |||||||
| Cause Analysis | |||||||
| Small horse-drawn cart | |||||||
| The hydraulic flow of the charging oil is low and the pressure fluctuates greatly | |||||||
| Comparison with Top Euro brand | |||||||
| Customized design to solve customer pain points | |||||||
| Short lead time, 3 months | |||||||
| Electrically controlled shifting and automatic shifting mode are adopted to reduce shifting impact and protect gears from damage | |||||||
| Hydraulic torque converter has large circulation, large transmitted torque, large traction and strong climbing ability. Change | |||||||
| Torque is not easy to heat up. | |||||||
| The clutch structure is improved to reduce the friction plate burning phenomenon caused by the inaccurate control of the engagement time of the 2 clutches during the shifting process. | |||||||
| The gear is thickened to improve the reliability of the gearbox. Higher reliability and longer life. |
| Payload 6~7 ton Calculation details | ||||||||
| Diesel Engine Model | kW | Torque Converter |
Transmission | Traction kN | 1st km/h | 2nd km/h | 3rd km/h | 4th km/h |
| Deutz BF6M 1013EC165KW |
165 | YJ330 (C273.1) |
RC33429 | 175.53 | 4.87 | 9.68 | 18.28 | 25.66 |
| Deutz BF6M 1013EC165KW |
165 | YJ330 (C273.1) |
RC33428 | 178.74 | 4.79 | 9.52 | 17.97 | 24.57 |
| CUMMIS B67CS4 | 162 | YJ330 (C273.1) |
RC33429 | 156.47 | 4.84 | 9.63 | 17.12 | 25.04 |
| CUMMIS B67CS4 | 162 | YJ330 (C273.1) |
RC33428 | 166.15 | 4.56 | 9.08 | 17.19 | 23.59 |
| Volvo TAD850VE | 162 | YJ330 (C273.1) |
RC33429 | 159.71 | 5.06 | 10.28 | 18.82 | 27.53 |
| Volvo TAD850VE | 162 | YJ330 (C273.1) |
RC33428 | 169.57 | 4.76 | 9.44 | 17.72 | 24.11 |
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Machinery, Wheel Loader;Backhoe Loader |
|---|---|
| Function: | Change Drive Torque, Speed Changing, Speed Reduction, Speed Increase |
| Layout: | Cycloidal |
| Hardness: | Hardened Tooth Surface |
| Installation: | Horizontal Type |
| Step: | Four-Step |
| Customization: |
Available
| Customized Request |
|---|
Efficiency of Cycloidal Gearboxes in Power Transmission
Cycloidal gearboxes offer relatively high power transmission efficiency compared to other types of gearboxes. The efficiency of a cycloidal gearbox depends on various factors, including the design, quality of components, lubrication, and load conditions.
Typically, the power transmission efficiency of a cycloidal gearbox ranges from 85% to 95%. However, this can vary based on several factors:
- Number of Reduction Stages: Multi-stage cycloidal gearboxes may experience slightly lower efficiency due to multiple gear meshing interactions.
- Quality and Design: Well-designed and precision-manufactured cycloidal gearboxes tend to exhibit higher efficiency.
- Lubrication: Proper lubrication is crucial for reducing friction and enhancing efficiency. Insufficient or deteriorated lubrication can lead to efficiency losses.
- Load Conditions: Higher loads and torque levels can lead to higher friction and lower efficiency. Properly matching the gearbox to the application is essential.
Despite minor efficiency losses compared to some other gearbox types, the benefits of compactness, high torque density, and precise motion control often outweigh the efficiency considerations in many applications.
Maintenance Requirements for Cycloidal Gearboxes
Maintaining cycloidal gearboxes is essential to ensure their optimal performance and longevity. Here are some maintenance practices to consider:
- Lubrication: Regular lubrication is crucial to prevent wear and friction between moving parts. Use high-quality lubricants recommended by the gearbox manufacturer.
- Inspections: Regularly inspect the gearbox for signs of wear, damage, or oil leakage. Address any issues promptly to prevent further damage.
- Cleaning: Keep the gearbox clean and free from debris that could interfere with its operation. Cleanliness helps prevent contamination and wear.
- Torque Checks: Periodically check the tightness of fasteners and bolts to ensure they are properly secured. Loose fasteners can lead to misalignment and reduced performance.
- Seal Maintenance: Check and maintain seals to prevent oil leakage. Damaged seals should be replaced promptly to avoid lubricant loss.
- Temperature Monitoring: Monitor the operating temperature of the gearbox to ensure it remains within the recommended range. Excessive heat can lead to premature wear.
- Alignment: Ensure that the gearbox is properly aligned with other components to prevent misalignment-related issues.
- Regular Service: Follow the manufacturer’s recommended service intervals for more in-depth inspections and maintenance tasks.
Regular and proactive maintenance can extend the lifespan of cycloidal gearboxes, minimize downtime, and maintain their efficiency and performance over time.
Principle of Cycloidal Gearing
Cycloidal gearing is a mechanism that utilizes the unique shape of cycloidal discs to achieve motion transmission. The principle involves the interaction between two main components: the input disc and the output disc.
The input disc has lobes with pins, while the output disc has lobes with matching holes. The lobes on both discs are not perfectly circular but are shaped in a cycloidal profile. As the input disc rotates, the pins on its lobes engage with the holes in the output disc’s lobes.
As the input disc rotates, the pins move along the cycloidal paths, causing the output disc to rotate. The interaction between the pins and the holes results in smooth and continuous motion transfer. The unique shape of the cycloidal profile ensures that there is always at least one point of contact between the pins and the holes, allowing for efficient torque transmission and reduced wear.
Cycloidal gearing provides advantages such as high torque capacity, compact size, and precision motion. However, due to the complex shape of the components and the continuous engagement, manufacturing and assembly of cycloidal gearboxes can be intricate.
editor by CX 2024-04-22
China OEM Rated Output Torque 1140-2000nm Helical Gear High Precision Cycloidal Gearbox for Pipe Bender with Best Sales
Product Description
Product Description
Rated output torque 1140-2000Nm Helical gear high precision cycloidal gearbox for pipe bender
Helical gear high precision cycloidal gearbox is a new generation of practical products independently developed by our company:
Low noise: less than 65db.
Low back clearance: up to 3 arc minutes in a CHINAMFG and 5 arc minutes in a double stage.
High torque: higher than the standard planetary reducer torque.
High stability: high strength alloy steel, the whole gear after hardening treatment, not only the surface hard substitution.
High deceleration ratio: Modular design, planetary gearbox can be interlinked.
Helical gear high precision cycloidal gearbox characteristic:
1.Planetary reducer manufacturer-Fubao Electromechanical Technology adopts an integrated planetary carrier and output shaft, which can provide better torsional rigidity. After precision machining, the gear set is not easy to eccentric, which can reduce interference, reduce wear and noise, and at the same time use a large The bearings are arranged with a wide span to distribute the load of the bearings, and once again strengthen the torque rigidity and radial load capacity of the gearbox. The output cover is made of aluminum alloy, which provides better heat dissipation capability for the product, so that the reducer produced by Fubao Electromechanical Technology can play an excellent role in the field of mechanical tools.
2.The planetary gear set is specially made of alloy steel. First, it undergoes quenching and tempering heat treatment to make the material hardness reach HRC30 degrees, and then undergoes nitriding surface treatment to HV860, so that the product has the characteristics of high surface hardness and high toughness in the center, and achieves the best product strength and service life. optimization.
3.The input shaft and the motor output shaft are connected by a bolted structure, with a round shaft seal design, and through dynamic balance analysis, it can ensure that there is no eccentric load at high speeds. After reducing unnecessary radial force, it can effectively Reduce the load on the motor side.
4.The material of the input cover/motor connection seat is made of aluminum alloy, which can provide better heat dissipation effect, and then provide good concentricity and verticality through professional lathe processing, so that the product can be stably combined with various motors, reducing the damage caused by insufficient precision. Unnecessary axial radial force makes the product have a longer life cycle.
| WAB series parameters | Model number | WAB042 | WAB60 | WAB090 | WAB115 | WAB140 | WAB180 | WAB220 |
| Rated output torque | 14-22 | 23-60 | 48-160 | 140-330 | 342-650 | 520-1200 | 1140-2000 | |
| Reduction ratio | L1: 3, 4, 5, 6, 7, 8, 9, 10 L2: 15, 20, 25, 30, 35, 40, 50, 70, 80, 100 | |||||||
| Planetary gear backlash | L1: P0≤1 P1≤3 P2≤5 L2: P0≤3 P1≤5 P2≤7 | |||||||
Detailed Photos
Product Details
Other products
Product Advantage
Compared with other reduction machines, planetary gear reduction machines have high rigidity, high precision (single stage can be achieved within 1 point), high transmission efficiency (single stage in 97-98%), high torque/volume ratio, lifetime maintenance free and other characteristics.
Because of these characteristics, planetary gear reducer is mostly installed on the stepper motor and servo motor, used to reduce speed, increase torque, matching inertia.
Company Profile
Factory Display
Q: Speed reducer grease replacement time
A: When sealing appropriate amount of grease and running reducer, the standard replacement time is 20000 hours according to the aging condition of the grease. In addition, when the grease is stained or used in the surrounding temperature condition (above 40ºC), please check the aging and fouling of the grease, and specify the replacement time.
Q: Delivery time
A: Fubao has 2000+ production base, daily output of 1000+ units, standard models within 7 days of delivery.
Q: Reducer selection
A: Fubao provides professional product selection guidance, with higher product matching degree, higher cost performance and higher utilization rate.
Q: Application range of reducer
A: Fubao has a professional research and development team, complete category design, can match any stepping motor, servo motor, more accurate matching.
/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Motor, Machinery, Agricultural Machinery, Mechanical Equipment |
|---|---|
| Hardness: | Hardened Tooth Surface |
| Installation: | Vertical Type |
| Customization: |
Available
| Customized Request |
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Materials Used in Manufacturing Cycloidal Gearboxes
Cycloidal gearboxes are constructed using a variety of materials to ensure durability, strength, and efficient operation. Some common materials used include:
- Steel: Steel is a popular choice due to its high strength and durability. It can withstand heavy loads and provides excellent wear resistance, making it suitable for industrial applications.
- Aluminum: Aluminum is chosen for its lightweight properties and corrosion resistance. It’s often used in applications where weight is a concern, such as aerospace and robotics.
- Cast Iron: Cast iron offers good heat dissipation and is known for its high resistance to wear and shock. It’s commonly used in heavy-duty applications that require high torque and strength.
- Alloys: Various alloy combinations can be used to enhance specific properties such as corrosion resistance, heat resistance, and strength.
- Plastics and Composites: In some cases, plastic or composite materials may be used, particularly in applications where low noise, lightweight construction, and corrosion resistance are essential.
The material selection depends on factors like the application’s torque, speed, environmental conditions, and desired performance characteristics. Each material offers a unique set of advantages, allowing cycloidal gearboxes to be customized to meet diverse industrial needs.
Use of Cycloidal Gearboxes in Precision Applications
Cycloidal gearboxes are well-suited for precision applications due to their unique design and capabilities. Here’s why they are used in precision settings:
- High Positional Accuracy: Cycloidal gearboxes offer high positional accuracy, making them suitable for applications that require precise positioning and movement.
- Backlash Reduction: The design of cycloidal gearboxes minimizes backlash, ensuring that there is minimal play between gears. This is crucial for maintaining accuracy in precision applications.
- Smooth and Controlled Motion: Cycloidal gearboxes provide smooth and controlled motion with minimal vibration, which is essential for delicate operations and precision machinery.
- Compact Design: Their compact design allows cycloidal gearboxes to be integrated into tight spaces without sacrificing performance. This is especially valuable in applications where space is limited.
- Repeatable Performance: Cycloidal gearboxes offer consistent and repeatable performance, which is vital for maintaining precision over multiple cycles.
- Low Backlash: The low backlash characteristic of cycloidal gearboxes ensures that there is minimal lost motion, contributing to their precision performance.
- High Torque Density: Despite their compact size, cycloidal gearboxes can handle high torque loads, making them suitable for applications that require both precision and power.
- Reduced Wear: The rolling contact design of cycloidal gears reduces wear and extends the lifespan of the gearbox, which is crucial for precision applications that demand consistent performance over time.
Overall, cycloidal gearboxes are a reliable choice for precision applications that require accurate positioning, controlled motion, and consistent performance.
Industries Benefiting from Cycloidal Gearboxes
Cycloidal gearboxes find applications in various industries where their unique characteristics are advantageous:
- Robotics and Automation: Cycloidal gearboxes are widely used in robotic systems for their compact design, high torque capacity, and precise motion control.
- Material Handling: Industries such as logistics and warehousing benefit from cycloidal gearboxes in conveyor systems due to their ability to handle heavy loads and provide smooth and accurate movement.
- Manufacturing: Equipment used in manufacturing processes, such as packaging machines and printing presses, often incorporate cycloidal gearboxes for their reliability and precise positioning.
- Aerospace: In aerospace applications, cycloidal gearboxes can be found in satellite systems, where their compactness and high torque-to-weight ratio are crucial.
- Medical Devices: Cycloidal gearboxes are used in medical equipment like robotic surgery systems for their precise movement capabilities and space-saving design.
- Defense: Military applications, such as remotely operated vehicles and surveillance equipment, benefit from cycloidal gearboxes’ ability to handle rugged conditions and provide precise control.
These industries leverage the advantages of cycloidal gearboxes to enhance the performance and efficiency of their systems.
editor by CX 2023-12-28
in Sekondi Takoradi Ghana sales price shop near me near me shop factory supplier OEM Stainless Steel Carbon Steel Forging and Machining Finish Helical Gear manufacturer best Cost Custom Cheap wholesaler
PersonnelOur product sales persons are effectively qualified to accommodate your requests and communicate English for your ease. Superior thermo treatment gear, such as community heat treatment oven, multi-use thermo treatment method oven, etc. We supply OEM support. OEM Stainless Steel/EPTT Metal EPT and Machining Complete EPTcal EPT
1. Description:
| Specification: | EPT EPTT Hardened and Tempered Metal EPTTd EPTs for EPTT |
| EPT : | EPTT Steel, Brass… |
| Treatment: | Carburizing, hardening and tempering, Nitriding, EPT remedy, black coating, zincing, nickelage etc. |
| Finish: | Clean amp smooth area,no cuting oil,steel chip amp scratch are allowed |
| Enamel Profile: | Spur |
| EPT: | Machining(OEM) |
| Concluded visual appeal: | To eliminate sharp edges |
| EPTT: | Internal EPTT:blister box Outer EPTT:stXiHu (West EPT) Dis.Hu (West EPT) Dis.rd cartons |
| EPTtiy: | Modest quantity can be accepted |
two. Our Product Selection
| EPT | EPTT Steel | SAE1571, SAE1045, Cr12, 40Cr, Y15Pb, 1214L. |
| Alloy Metal | 20CrMnTi, 16MnCr5, 20CrMnMo, 41CrMo, 17CrNiMo5… | |
| Brass/Bronze | HPb59-one, H70, CuZn39Pb2, CuZn40Pb2,C38000, CuZn40 | |
| Machining procedure | EPT Hobbing, EPT Milling, EPT Shaping, EPT Broaching, EPT Shaving, EPT EPT and EPT Lapping | |
| Module | 1., 1.twenty five, one.five, one.seventy five, two., two.25, 2.five….8. | |
| Tolerance control | Outer Diameter: plusmn0.005 mm | Size Dimension: plusmn0.05 mm |
| Tooth accuracy | DIN Course 4, ISO/GB Course 4, AGMA Class 13, JIS Class | |
| Heat treatment | Quenching amp Tempering, Carburizing amp Quenching, EPT-frequency Hardening, EPTTitriding… | |
| Surface area therapy | Blacking, PoEPTTng, Anodization, Chrome plating, Zinc plating, Nickel plating… | |
Our Major EPT:
spur EPT worm EPT EPTTl EPT planetary EPT EPT steel EPT cycle EPT pinion EPT EPT producing helical EPT personalized EPT spiral EPTTl EPT rack and pinion EPT mechanical EPTs EPTT EPTs rack EPT spiral EPT perform EPT EPT EPTT richmond EPT hypoid EPT EPT wheels pulleEPTTand EPTs motive EPT EPT teeth EPT EPT EPT technique involute EPT
3. Scope of EPT
a) Dimension report
b) Profile report
c) EPTT remedy report
d) EPT certification
4. Supply Time
| Samples: | |
| Samples quantity | 1-10pcs |
| Samples delivery date | 15-twenty times |
| Mass Orders: | |
| 100pcs -500pcs | fifteen-20 days |
| 500pcs-1000pcs | thirty days |
| 5Kpcs | 45 times |
| EPTT: | |
| Interior EPTT | Blister box |
| Outer EPTT | StXiHu (West EPT) Dis.Hu (West EPT) Dis.rd cartons |
five. Our Solutions
a) OEM: In accordance to your drawings and samples specifications.
b) Small orEPTTis approved.
c) EPT precision.
d) Extensive and successful following-sale provider
6. Our company advantage:
one. EPTs: Steel, stainless metal, EPT alloy, EPTs, copper, brass, bronze alloy are available.
two. Surface area therapies are available: PoEPTTng, anodize, zinc plating, nickel plating, powEPTTcoating, e-coating, chrome.
three. Superior inspection products for rigorous high quality and management and specific specification.
4. We are a immediate maker, have plenty of experience for EPTT EPTT elements and medical elements.
five. Customizing inspection report, supplying the materials certification.
six. All sorts of drawing formats are available. For illustration: Pro/E, strong performs, Ci-matron, Automobile CAD and so on.
7. Young handle staff with successful productivity, swift response and contemporary business idea.
7. EPT:
Your inquiry will be replied inside twelve several hours.
Properly-skilled amp knowledgeable income can reply your inquiries in EPT.
Throughout doing work time, E-mail will be replied to you inside 2 hrs
OEM amp ODM initiatives are very welcomed. We have robust R ampD team.
The orEPTTwill be developed exactly in accordance to orEPTTdetails and proofed samples. Our QC will post inspection report just before shipment.
Your company romantic relationship with us will be private to any third get together.
Great following-sale provider.
FAQS:
Q: Why choose EPT solution?
A: We shengao have our possess EPTT– WeiEPTT EPT EPTTry EPTT, Ltd, consequently, we can certainly guarantee the top quality of each product and give you equivalent value.
Q: Do you give OEM Support?
A: Of course, we provide OEM Services.
Q: Do you provide EPT EPTT EPTs?
A: Sure. Clients give us drawings and technical specs, and we will manufacture appropriately.
Q: What is your payment time period?
A: We offer kinds of payment conditions these kinds of as L/C, T/T, Paypal, Escrow, and so on.
If you will find something we can assist, remember to really feel free to make contact with with us.
